The AirTAC GFR600C25JC2WG AirTAC Filter Regulator G1 (1 in) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C25JC2WG is a filter regulator: one body that removes water and particulate from compressed air and then regulates the pressure delivered downstream. This 600-size unit has a G1 (1 in) G-thread port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the bowl, and a round pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi); maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Because this is size 600, the bowl is aluminium alloy, and this configuration is supplied without a mounting bracket and without a reverse/check valve.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and options include 40 um or 5 um filtration, differential-pressure, automatic or manual drains, embedded square or external round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads in place of the PT standard, and a mounting bracket. Rated flow for the GFR600 is published as a curve rather than a single figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR600C25JC2WG AirTAC Filter Regulator G1 (1 in) |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Installed at the drop from a compressor receiver on a factory air main, this unit strips water and particulate down to 5 um and holds a steady regulated pressure for the whole downstream distribution ring.
Feeding the pneumatic conveyor, gating and stopper cylinders on a bottling or packaging line, where clean, moisture-reduced air at a fixed setting keeps actuator stroke behaviour consistent through the shift.
Preparing the air supply for quarter-turn valve actuators on a water-treatment or chemical dosing skid, filtering the supply to 5 um and regulating it to the actuator's set pressure.
The main decodable choices are size and port: 200, 300, 400 and 600 step up in port size and flow capacity, so match the 1 in G1 port on this unit to your line size and air demand. Drain type matters: this unit carries the differential-pressure drain (the catalogue default), while automatic (code A) and manual (code M) versions exist for unattended or supervised duty. Filter grade is 40 um standard or 5 um with code W - this configuration carries the 5 um element. Gauges are the embedded square type as standard or an optional external round gauge, with MPa, psi or bar scales; this unit has a round gauge reading in psi. Thread is PT as the standard, with G (BSPP) and NPT as order options, and a mounting bracket is optional - this unit is supplied without one. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 as a curve rather than a single rated figure, so we do not quote a number here. Tell us your line size and air demand and we will confirm the flow curve and the datasheet figures for this exact model on request.
The differential-pressure drain is the catalogue default: it bleeds accumulated condensate from the bowl as the pressure differential across the filter element rises. Code A gives an automatic drain for unattended installations, and code M gives a manual drain where an operator drains the bowl as part of routine checks.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.