The AirTAC GFR600C25JF1WT AirTAC Filter Regulator NPT 1 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C25JF1WT is a size 600 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a 1 in NPT port, a 5 um filter element (the finer of the two available grades), a differential-pressure drain, an embedded square gauge scaled in MPa, standard regulation with a 0.15-0.9 MPa (20-130 psi) adjustment range, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. At size 600 the bowl is aluminium alloy.
This is a genuine AirTAC part. The GFR series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, PT as the standard thread and G or NPT to order, with differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and embedded square gauges (MPa, psi or bar scales) or an optional external round gauge. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR600C25JF1WT AirTAC Filter Regulator NPT 1 in |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Positioned at the drop to a spray booth, this unit strips water and fine particulate from the shop air and holds a steady regulated pressure, so finish quality at the gun does not wander with plant pressure swings.
Mounted ahead of the pneumatic cylinders on a carton-sealing or case-packing conveyor, it delivers clean, moisture-reduced air at a set pressure so clamp and push strokes repeat consistently through the shift.
Installed on the instrument-air branch feeding pneumatic control valves and actuators, it removes condensate and 5 um particulate and regulates the supply pressure the actuator manufacturer specifies.
Size 600 with a 1 in port is the largest step in the GFR range, so match the unit to the air your line consumes and step through 200/300/400/600 as the port and duty require. The W code selects the 5 um element, one grade finer than the 40 um standard, for points of use that need cleaner air. The differential-pressure drain discharges condensate automatically as air passes through, with no manual draining routine; automatic and manual drains are orderable alternatives. The embedded square gauge reads in MPa, with psi or bar scales and an external round gauge available to order. PT is the standard thread and G or NPT are catalogue options - NPT is specified on this model. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your operating pressure and air demand and we will confirm the datasheet curve figures for this exact model on request.
The W code selects the 5 um element, one grade finer than the 40 um standard, for cleaner air at the point of use. The drain is the differential-pressure type, which discharges condensate automatically as air flows through, so no manual drain routine is needed. Automatic or manual drain versions can be ordered instead if your duty cycle suits them better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.