The AirTAC GFR600C25JF2WGK AirTAC Filter Regulator G1, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C25JF2WGK is a size-600 filter regulator: water and particulate filtration plus downstream pressure regulation in a single body. This configuration is built with a G1 (1 in) G-thread port, a 5 um filter element (the 40 um standard element is also available in the series), a differential-pressure drain, and a metal bowl - at size 600 the bowl is aluminium alloy. The standard regulator adjusts from 0.15-0.9 MPa (20-130 psi) and is read on the fitted embedded square gauge with a psi scale; an external round gauge is available as an option. A reverse/check valve is fitted, and the unit is supplied without a mounting bracket (a bracket is available as an option). Maximum inlet pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge scales in MPa, psi or bar, and PT as the standard thread with G and NPT as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR600C25JF2WGK AirTAC Filter Regulator G1, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Point-of-use filtration and regulation on the air drop feeding a spray booth. The 5 um element strips water and particulate before the gun, and the regulator holds the set line pressure on the psi gauge.
Regulated supply for the pneumatic cylinders that index and stop containers on a filling-line conveyor. The fitted check valve holds the downstream setting if the upstream supply dips.
Clean, regulated air for tool-change clamps and air blast on a machining centre. The 1 in G-thread port suits a main machine feed, and the differential-pressure drain handles condensate collected in the aluminium alloy bowl.
Choose the size step (200/300/400/600) against the port and the flow your line needs - this unit is the largest step, with a G1 (1 in) G-thread port. Decide the drain: differential-pressure (as specified here, pairing with the 0.15-0.9 MPa / 20-130 psi adjust range), automatic, or manual (the manual-drain version widens the adjust range to 0.05-0.9 MPa / 7-130 psi). Pick the element grade: 40 um standard or 5 um as ordered here. Set the gauge scale - MPa, psi or bar; this unit reads psi on the embedded square gauge. Thread: PT is the standard, with G (as ordered here) and NPT as catalogue options. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your required flow and working pressure and we will confirm the sizing from the datasheet on request.
The W code specifies the 5 um element instead of the 40 um standard, for finer removal of water and particulate ahead of sensitive equipment. The K code fits a reverse/check valve, which holds the downstream setting if upstream pressure is lost. The drain on this unit is the differential-pressure type, the series default.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.