The AirTAC GFR600C25MJC2WGK AirTAC Filter Regulator G1 1 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C25MJC2WGK is a size 600 filter regulator that removes water and particulate from compressed air and sets downstream pressure in one body. This configuration carries a G1 (1 in) port with G thread, a 5 um filter element (code W), a manual drain on the bowl, a round external gauge reading in psi, and a built-in reverse/check valve; it is supplied without a mounting bracket. The size 600 bowl is aluminium alloy, and the standard regulator covers 0.05-0.9 MPa (7-130 psi) with manual drain.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of 40 um standard or 5 um filtration, manual, automatic or differential-pressure drains, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR600C25MJC2WGK AirTAC Filter Regulator G1 1 in |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Feeding spray guns and air-atomising applicators on a paint line, where the 5 um element keeps particulate out of the finish and the regulator holds a steady set pressure at each drop.
Supplying cylinders and gripper actuators on a high-cycle packaging conveyor, with the check valve holding the downstream circuit against backflow and the psi gauge giving operators a visible setpoint.
Conditioning the shop-air feed to a machining centre's tool-change and clamping circuits, where clean, regulated air at a fixed pressure protects valves and cylinders day after day.
Step up through the GFR sizes (200/300/400/600) as your port and air demand grow; this unit is the size 600, 1 in option for the largest duty in the range. Choose the drain to suit access: manual (as here) when an operator can bleed the bowl on a schedule, automatic for unattended draining, or the differential-pressure default. Pick 5 um (this unit, code W) where downstream equipment needs finer filtration than the 40 um standard, and select the gauge scale you want to read - this one is psi. Thread is PT as standard with G and NPT as order options, and a bracket can be added if the unit is not this no-bracket version. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Tell us your application and we will confirm the flow and full datasheet figures for this unit on request before you order.
This configuration uses a manual drain, meaning the accumulated water is bled from the aluminium bowl by hand on a schedule. If the unit will sit where nobody drains it regularly, the same GFR600 size is available with an automatic drain or the differential-pressure default drain - just ask and we will decode the right variant for you.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.