The AirTAC GFR600C25MLJC1T AirTAC Filter Regulator NPT 1 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body, so one 1 in NPT connection does both jobs on a main air drop. This size 600 unit is the large-flow frame of the range, fitted with a manual drain for controlled bowl blowdown, a 40 um standard filter element, a low-pressure regulator type, and an external round gauge reading in MPa. The metal bowl on size 600 units is aluminium alloy, and this configuration is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include automatic or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR600C25MLJC1T AirTAC Filter Regulator NPT 1 in |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
A 1 in filtered and regulated feed taken from a compressor receiver to a factory distribution header, with the manual drain blown down during scheduled rounds.
Filtered, regulated air feeding the cylinder and actuator banks that drive conveyor stops, fill heads and capping motion on a packaging line.
A regulated supply branch serving pneumatic clamps and swing cylinders on CNC fixtures, where the low-pressure regulator type holds a reduced setpoint.
Size 600 with a 1 in port is the right step when a main header or large drop carries more air than 1/2 in units can pass; step down to 300 or 400 for branch lines. Drain choice is a real decision: this unit has a manual drain, which suits attended installations where an operator blows down the bowl on a schedule; choose automatic or differential-pressure drain codes for unattended drops. The 40 um element is standard; specify the W code for the 5 um grade where downstream equipment needs finer particulate capture. The external round gauge here reads in MPa, and psi or bar scales are available as codes. Thread is NPT on this unit; PT is the standard catalogue thread and G is also an order option. Bracket: this configuration omits it.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a flow number. Send us your application and we will confirm the sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a flow, Cv or SCFM number. Tell us your application and line conditions and we will confirm the sizing from the datasheet on request.
The M in the code specifies a manual drain: the bowl is emptied by hand on a schedule, which suits attended installations. The same size 600 filter regulator can be ordered with an automatic drain (code A) or the default differential-pressure drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.