ISO 15552 Cylinder Cross-Reference: Festo and SMC to AirTAC SAI / SE
ISO 15552 mounting dimensions of AirTAC SAI and SE cylinders, bores 32 to 200 mm, and what to check when replacing a Festo DSBC / DNC or SMC CP96 / C96 cylinder.
ISO 15552, which replaced ISO 6431 (VDMA 24562 is the matching German standard), fixes the mounting interface of profile-barrel and tie-rod cylinders with bores from 32 to 320 mm. Two cylinders of the same bore built to it share the mounting bolt square, cover screw thread, rod thread and port size, so they fit the same mounting accessories and rod-end parts. AirTAC builds two ISO 15552 families: SAI (bores 32 to 200 mm) and SE (bores 32 to 125 mm).
ISO 15552 interface dimensions of AirTAC SAI and SE
Values from the AirTAC SAI and SE catalogs, in mm. The ISO 15552 symbol is given in brackets; the AirTAC drawing letter follows it. SE uses the same values for every column in this table.
| Bore | Bolt square TG (□KB) | Cover screw RT (K) | Rod thread KK (E) | Thread length AM (EA) | Rod Ø MM (D) | Body length L8 (AC) | Length A + stroke | Port | AirTAC model pages |
|---|---|---|---|---|---|---|---|---|---|
| Ø32 | 32.5 | M6 | M10×1.25 | 22 | 12 | 94 | 142 | 1/8" | SAI32 · SE32 |
| Ø40 | 38 | M6 | M12×1.25 | 24 | 16 | 105 | 159 | 1/4" | SAI40 · SE40 |
| Ø50 | 46.5 | M8 | M16×1.5 | 32 | 20 | 106 | 175 | 1/4" | SAI50 · SE50 |
| Ø63 | 56.5 | M8 | M16×1.5 | 32 | 20 | 121 | 190 | 3/8" | SAI63 · SE63 |
| Ø80 | 72 | M10 | M20×1.5 | 40 | 25 | 128 | 214 | 3/8" | SAI80 · SE80 |
| Ø100 | 89 | M10 | M20×1.5 | 40 | 25 | 138 | 229 | 1/2" | SAI100 · SE100 |
| Ø125 | 110 | M12 | M27×2 | 54 | 32 | 160 | 279 | 1/2" | SAI125 · SE125 |
| Ø160 | 140 | M16 | M36×2 | 72 | 40 | 180 | 332 | 3/4" | SAI160 |
| Ø200 | 175 | M16 | M36×2 | 72 | 40 | 180 | 347 | 3/4" | SAI200 |
A is measured from the end of the rod thread to the rear cover with the rod retracted; add the stroke. Magnet versions (S) have the same dimensions. Ports are PT as standard; G is an option.
Replacing a Festo or SMC ISO 15552 cylinder
Festo DSBC and DNC and SMC CP96 and C96 are sold by their makers as ISO 15552 cylinders. For the same bore the interface values in the table above are what the standard requires, so an SAI or SE cylinder bolts to the same flange, foot, clevis or trunnion pattern and takes the same rod clevis or rod eye.
We do not publish dimensions of other makes. Before ordering, compare the drawing of the cylinder you are replacing with the table above, and check these points that the standard does not settle:
- Sensors. Sensor slots and sensors are not part of the ISO 15552 interface. Use the AirTAC sensor listed for the AirTAC cylinder (CMSE or DMSE fit both SAI and SE; SE also takes CS1-E and DS1-E).
-
Magnet. A sensor needs the magnet version: add
Sto the order code. - Stroke and cushioning. SAI and SE have adjustable air cushioning; the cushion length is 27 mm on Ø32 and up to 50 mm on Ø160 and Ø200 (SAI catalog).
-
Rod material and seals. Rod
A= SUS420J2,B= SUS304; sealH= FKM / Viton for 0 to 150 °C,N= NBR. The standard rod is chrome-plated carbon steel with TPU seals. -
Port thread. Standard ports are PT; order
Gfor BSPP. See the port thread guide.
Check before you replace: Highlighted values are not fixed by an ISO standard. Check them against the CAD model or PDF drawing of the part you are replacing before you order. Overall length, body width and sensor fit can differ between makes even when the ISO interface matches.
| Brand family | Sold as | AirTAC families to compare |
|---|---|---|
| Festo DSBC | ISO 15552 | SAI, SE |
| Festo DNC | ISO 15552 | SAI, SE |
| SMC CP96 | ISO 15552 | SAI, SE |
| SMC C96 | ISO 15552 | SAI, SE |
Festo and SMC are trademarks of their owners. Names are used only to identify the standard a part is built to; AirtacDistr is not affiliated with them.
SAI or SE: what differs
- Bores: SAI 32 to 200 mm; SE 32 to 125 mm.
- Sensor slots: SAI has them on two sides of the barrel; SE on three sides.
- Shared: 0.15 to 1.0 MPa, -20 to 70 °C, 30 to 800 mm/s (30 to 500 mm/s from Ø125), the same standard stroke table and the same mounting accessories (LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2).
Body width is the one outside dimension in the catalogs that differs, by up to 6 mm, and it is not fixed by ISO 15552:
| Bore | SAI body square B | SE body square B |
|---|---|---|
| Ø32 | 47 | 46.5 |
| Ø40 | 53 | 54 |
| Ø50 | 65 | 64 |
| Ø63 | 75 | 75 |
| Ø80 | 95 | 93 |
| Ø100 | 115 | 110 |
| Ø125 | 140 | 134 |
| Ø160 | 180 | - |
| Ø200 | 220 | - |
Highlighted values are not fixed by an ISO standard. Check them against the CAD model or PDF drawing of the part you are replacing before you order.
Building the AirTAC order code
SAI 50 [rod] × 100 S [mounting] [seal] [thread]. A Ø50 × 100 mm cylinder with a magnet is SAI50X100S; with G ports it is SAI50X100SG. SE follows the same order: SE50X100S. SAID / SED are double-rod versions and SAIJ / SEJ have an adjustable stroke. Each model page lists every code with its price.
Frequently asked questions
Can an AirTAC SAI cylinder replace a Festo DSBC or SMC CP96?
Festo DSBC and SMC CP96 are sold as ISO 15552 cylinders, and SAI is built to ISO 15552, so for the same bore the mounting bolt square, cover screw thread, rod thread and port size match. Sensors are not interchangeable: use AirTAC CMSE or DMSE sensors on the magnet version (S). Compare overall length with the drawing of the cylinder you are replacing.
What is the mounting bolt square of an ISO 15552 cylinder?
On AirTAC SAI and SE cylinders it is 32.5 mm for Ø32, 38 mm for Ø40, 46.5 mm for Ø50, 56.5 mm for Ø63, 72 mm for Ø80, 89 mm for Ø100, 110 mm for Ø125, 140 mm for Ø160 and 175 mm for Ø200.
What is the difference between AirTAC SAI and SE?
Both are ISO 15552 profile cylinders with the same interface dimensions and accessories. SAI covers bores 32 to 200 mm with sensor slots on two sides; SE covers 32 to 125 mm with sensor slots on three sides. Body width differs slightly.
Which rod thread does an ISO 15552 Ø63 cylinder use?
M16×1.5, the same as Ø50. Ø80 and Ø100 use M20×1.5, Ø125 uses M27×2 and Ø160 and Ø200 use M36×2.
Have a part number, a nameplate photo or a BOM? Send it and we reply with prices and the matching AirTAC order codes within 7 hours.
Request a quote