
The AirTAC 4V220-06 Solenoid Valve, 4V200 Series (4V22006-X0) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V22006-X0 is the coil-less valve body of the AirTAC 4V220-06: a 5/2-way double-solenoid spool valve on the 4V200 platform with PT 1/8" ports. It ships WITHOUT the solenoid coils and WITHOUT the electrical connector (the coil-retaining nut is retained), so you order the coils separately at whatever voltage your cabinet runs - AC or DC. Pneumatically it is the standard 4V220: two pulse signals flip the spool, and because it has no return spring, the spool simply stays in the position it was last pulsed to, held by land friction and balanced pressure rather than any magnet. Power can drop out and the outputs do not change.
Flow capacity sits in the mid-body class: 17.0 mm2 effective area (Cv 1.0, catalog figure for the 4V210-08), which is the right size to run double-acting cylinders and actuators in roughly the O32-50 mm bore range. The complete valve responds in 0.05 s or less and cycles up to 5 times per second, and this bare body weighs about 320 g before the coils are fitted. Supply air should be filtered to 40 um and regulated between 0.15-0.8 MPa; the aluminum-alloy body carries the IP65 (DIN40050) rating once a rated coil is mounted.
| Model | AirTAC 4V220-06 Solenoid Valve, 4V200 Series (4V22006-X0) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 320 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Pulse each solenoid once and the spool holds the position without continuous power - useful on assembly fixtures where a clamped or extended state must persist through a control-power interruption on O32-50 mm double-acting cylinders.
Because -X0 arrives without coils or connector, panel builders and service shops can fit the exact coil voltage already specified on their machine and re-use existing connectors, keeping spares inventory to a single body.
Cv 1.0 (catalog figure for the 4V210-08) flow and a 0.05 s response shift small pusher and diverter cylinders quickly enough for packaging lines running up to 5 cycles per second, with manual override on the body for commissioning and jam clearing.
Choose the 4V200 body when your cylinder sits between the small-bore range of the 4V100 (Cv 0.6) and the larger bores or faster cycles that need the 4V300 (Cv 1.65); at Cv 1.0 (catalog figure for the 4V210-08) this body is the natural middle step for O32-50 mm double-acting cylinders. Within the body, pick this 5/2 double-solenoid (function 20) when you want a pulsed, remembered position rather than the constant signal a single-solenoid 5/2 needs; step to a 5/3 (30C/E/P) only if you need a genuine center condition - blocked, exhausted or pressured. Single bodies can also be stacked on a manifold base to build a compact multi-valve group.
For replacement matching, confirm five points against the old unit: body size (4V200), function digit (20 for this memory 5/2), port and thread (PT 1/8" tapered), coil voltage, and electrical entry. With the -X0 suffix the last two are deliberately open - the body accepts standard 4V220 coils, so you select voltage and entry style when ordering the coil, which makes this body ideal as an OEM spare or for re-using coils you already have.
AirtacDistr lists every 4V220-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v220-06-solenoid-valve
Quick checklist
It means you receive the bare 4V220-06 valve body only: no solenoid coils, no electrical connector, and typically no indicator light - the coil-retaining nut is kept so you can mount your own coils. The pneumatic side is unchanged (5/2 double solenoid with spool memory, PT 1/8" ports, 17.0 mm2 effective area, Cv 1.0). Order standard 4V220 coils separately in the voltage and entry style your system uses; once a rated coil is installed the assembly meets the IP65 rating.
It directs air to double-acting cylinders and actuators in the ~O32-50 mm bore class, moving 17.0 mm2 (Cv 1.0, catalog figure for the 4V210-08) of flow with a 5-cycle-per-second limit. After a pulse, the spool stays where it was set by land friction and balanced pressure - there is no spring and no holding current, so the valve does hold its switched position through a power loss. That is a positional memory, not a load-holding safety device: for suspended or fall-hazard loads, add a pilot-operated check valve at the cylinder ports or a mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.