verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0)

The AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/8
  • Effective area13.6 mm²
  • Flow (Cv)0.8
  • Series4V200
$44.09 $48.87Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V230C-06 stroke, mounting and version on one page All 4V230C-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0)

The AirTAC 4V230C06-X0 is the coil-less valve body of the 4V230C-06: a 5/3-way, double-solenoid valve with a closed center, supplied without the solenoid coil and without the electrical connector so you can fit the coil voltage your panel actually needs. With both solenoids de-energised the closed center blocks all five ports, which parks a double-acting cylinder and holds it in place - though for suspended loads a mechanical brake or pilot-operated check valves at the cylinder ports remain necessary. The spool carries an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and switches at up to 3 cycles per second.

Built on the aluminium 4V200 body in 1/8" PT (Rc tapered) ports, this mid-body size suits roughly O32-50 mm bores and weighs 360 g. Operating pressure is 0.15-0.8 MPa with a 1.2 MPa proof pressure, response is 0.05 s or better, and the body mounts on a base for an integrated manifold group. Order the coil and connector separately at DC12V, DC24V, AC24V, AC110V or AC220V.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0) Technical Specifications

ModelAirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0)
Series4V200 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/8
Exhaust portPT1/8
Effective area (Cv)13.6 mm² (Cv 0.8)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight360 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area13.6 mm²
Flow coefficientCv 0.8
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-06Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0) Is Used

precision_manufacturing

Mid-stroke cylinder positioning

Closed-center blocking lets a double-acting O32-50 mm assembly or press cylinder pause between positions on a fixture, with the spool holding its last pulsed state when both coils are off.

settings_input_component

OEM spare and body-swap maintenance

A bare body lets maintenance teams keep one coil stock across AC and DC machines: replace a worn 4V200 spool body and transfer or reorder the coil at each machine's voltage.

view_module

Manifold valve groups

The 4V200 base system accepts this 360 g body alongside 5/2 neighbours, so a closed-center stop station can share one supply manifold with ordinary memory valves.

Is the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0) the Right Valve?

Pick this 4V230C body when your cylinder is too demanding for the 4V100 (Cv 0.6) but the 4V300 (Cv 1.65) is oversized - the 13.6 mm2 orifice of this closed-center 5/3 version sits squarely between them. Choose closed center (30C) over exhaust (30E) or pressure (30P) when the actuator must stop and stay put at mid-position. Because -X0 omits the coil, budget for it as a line item: match the replacement by body size (4V200), function (30C), port and thread (1/8" PT), then select the coil at your control voltage and the entry style (terminal or grommet) as separate parts.

AirtacDistr lists every 4V230C-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230c-06-solenoid-valve

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0) FAQ

It is the bare valve body option: the 5/3 closed-center pneumatic valve ships without its solenoid coil and without the electrical connector (the coil-retaining nut is normally retained). You order the coil separately at the voltage you need - the ports, spool, Cv 0.8 (catalog figure for the 4V230C-08) flow class and 360 g body are identical to a complete 4V230C-06.

It directs compressed air to double-acting cylinders and actuators in roughly the O32-50 mm bore range, with an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a 3 cycle/sec ceiling - the 5/3 spool flows less than the 5/2 version's 17.0 mm2 / Cv 1.0. At center both cylinder ports are blocked, so the actuator stops where it was; add pilot-operated check valves or a mechanical brake if the load must be held against gravity.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06-X0)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V230C06-X0 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.