verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM)

The AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/8
  • Effective area13.6 mm²
  • Flow (Cv)0.8
  • Series4V200
$58.17 $63.30Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V230C-06 stroke, mounting and version on one page All 4V230C-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM)

The 4V230C-06A-AM is the closed-centre 5/3 version of the AirTAC 4V200 body in the 1/8 PT port size, built here with the factory -AM option: an AMISCO (Italian) solenoid coil is fitted in place of the standard coil, while the valve body, ports and flow behaviour stay identical. Energise one solenoid and the spool sends air to one side of a double-acting cylinder while exhausting the other; de-energise both and the closed centre blocks all five ports, so the cylinder stops and holds where it was. Note that the hold is a pressurised stop, not a positive lock - for suspended or fall-protection loads add a pilot-operated check valve or mechanical brake at the cylinder.

As a 5/3 model its flow sits a step under the 5/2 members of this body family: an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling rate of 3 cycles per second, enough to size and speed cylinders in roughly the O32-50 mm bore range. Switching response is 0.05 s or better, the aluminium body weighs 360 g, and the AC220V coil connects through a terminal box; the exact VA rating of the AMISCO coil should be confirmed with us before ordering.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM) Technical Specifications

ModelAirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM)
Series4V200 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/8
Exhaust portPT1/8
Effective area (Cv)13.6 mm² (Cv 0.8)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight360 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area13.6 mm²
Flow coefficientCv 0.8
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-06Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM) Is Used

precision_manufacturing

Assembly station stops

Closed-centre 5/3 control lets a press-fit or locating cylinder freeze mid-stroke between parts, with a Cv 0.8 (catalog figure for the 4V230C-08) flow class suited to O32-50 mm double-acting bores.

view_module

Indexing fixtures and clamps

Both solenoids de-energised blocks all ports, holding clamp position through an interruption without air consumption at centre; add port checks where load drop cannot be tolerated.

conveyor_belt

Packaging diverters and pushers

Three-position switching at up to 3 cycles per second handles divert, hold and retract positions on packaging lines running a 220 V AC supply from a terminal-box connection.

Is the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM) the Right Valve?

Choose this closed-centre 4V230C-06A-AM when a double-acting cylinder must pause and stay put at mid-stroke, not just at the ends. If your cycle simply needs two positions, the 5/2 single-solenoid 4V210 (spring return) or 5/2 double-solenoid 4V220 within the same body give you more flow - 17.0 mm2 / Cv 1.0 and 5 cycles per second. Step down to the 4V100 (Cv 0.6) for small bores, or up to the 4V300 (Cv 1.65) when a larger bore or faster stroke demands it. The valve can sit on a single base as an integrated manifold group for multi-valve stations. Replacing an existing unit? Match all five points: 4V200 body, 30C closed-centre function, 1/8 PT port, AC220V coil and terminal-box entry - and remember the -AM option means the AMISCO coil variant, so confirm its rating with us.

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM) FAQ

It is a 5/3-way double-solenoid valve for double-acting cylinders and actuators, not single-acting ones. In the 1/8 PT port size it flows an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a 3 cycle-per-second maximum, which sizes well for cylinders around O32-50 mm bore on 0.15-0.8 MPa filtered air.

The -AM option fits an AMISCO (Italian) solenoid coil instead of the standard AirTAC coil. The valve body, 5/3 closed-centre function, 1/8 PT ports and flow are unchanged, and the ordered voltage remains AC220V - but our published 4.5 VA figure applies to the standard coil only, so confirm the AMISCO coil rating with us before ordering.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06A-AM)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V230C06A-AM and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.