
The AirTAC 4V210-06 Solenoid Valve, 4V200 Series (4V21006A-AM) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V21006A-AM is a 4V200-series 5/2 single-solenoid valve in the 1/8in PT port size, wired for AC220V through a terminal box and fitted at the factory with an Italian AMISCO solenoid coil instead of the standard one. Buyers who specify AMISCO usually do it for coil-sourcing consistency across a plant, so this variant drops into existing AMISCO-based panels without changing the spool valve itself. Air flows at an effective area of 17 mm2 (Cv 1.0) and the valve shifts in 0.05 s or less.
Function is spring return: energise the AC220V coil to send air to one side of a double-acting cylinder, and de-energise it so the internal spring returns the spool and reverses the stroke. That makes it right for circuits that must fail back to a known position whenever the signal drops. It suits double-acting cylinders of roughly O32-50 mm bore, weighs 220 g, runs on 0.15-0.8 MPa of filtered air, and carries IP65 protection. Note the AMISCO coil's electrical rating is not published in our data, so confirm the exact VA figure with us before ordering.
| Model | AirTAC 4V210-06 Solenoid Valve, 4V200 Series (4V21006A-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Spring return makes the clamp release the moment the AC220V signal is cut, a simple fail-safe for fixtures where a stuck clamp could damage parts or jam the operator.
Cv 1.0 (catalog figure for the 4V210-08) flow and a shift time of 0.05 s or under keep short-stroke pushers snappy on packaging lines running double-acting cylinders up to about O50 mm bore.
Plants that keep every coil as AMISCO for spares commonality can add this valve without introducing a second coil brand into the panel stock.
Size by bore and cycle rate: for bores under about O32 mm or slow strokes, the smaller 4V100 (Cv 0.6) is enough, while bores above O50 mm or fast packaging cycles call for the 4V300 (Cv 1.65). Within 4V200, pick the 10 function here if a dropped signal must retract or extend the cylinder; choose the 20 double-solenoid version only if you want pulsed-signal memory, and the 30C/30E/30P versions for 5/3 center duties at Cv 0.8. One valve per station or a shared manifold base on the 4V200 platform both work.
When replacing, match five things: body size 4V200, function code 10, port 1/8in with PT thread, coil voltage AC220V, and entry type terminal box. Also confirm your current valve carries the -AM suffix, because that tells us to ship the AMISCO-coil build rather than the standard AirTAC coil.
Quick checklist
Only the coil. The -AM suffix means the valve ships with an AMISCO (Italian) solenoid coil fitted at the factory instead of the standard AirTAC coil. Body, 5/2 spring-return function, 1/8in PT ports and Cv 1.0 (catalog figure for the 4V210-08) flow are identical. Because the AMISCO coil's VA rating is not in our published data, ask us to confirm the exact electrical figure for your AC220V supply.
The internal spring takes over. A single-solenoid 5/2 valve needs the AC220V coil energised continuously to hold one cylinder position; when the signal drops, the spring returns the spool and the double-acting cylinder moves to its other position. Size the coil supply accordingly, and if the application must guarantee load holding against a suspended weight, add a pilot-operated check valve or mechanical brake at the cylinder rather than relying on the valve alone.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.