verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM)

The AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/8
  • Effective area13.6 mm²
  • Flow (Cv)0.8
  • Series4V200
$58.17 $63.30Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V230C-06 stroke, mounting and version on one page All 4V230C-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM)

The AirTAC 4V230C06B-AM is a 5/3-way closed-center solenoid valve from the 4V200 range, built to route compressed air to double-acting cylinders and actuators up to roughly O32-50 mm bore. Two solenoids pulse the spool in either direction; when both are off, the closed center blocks all five ports, so the cylinder stops and holds its position mid-stroke. In the centre position the effective area drops to 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and the maximum switching rate is 3 cycles per second.

This specific SKU pairs the 1/8in PT-threaded body with a DC24V coil on a terminal-box entry and carries the factory -AM option: an AMISCO (Italian) solenoid coil fitted in place of the standard AirTAC coil. The valve weighs 360 g, responds in 0.05 s or less, and shares the same spool body, aluminium alloy construction and IP65 protection as every other 4V200 model, so it can be mounted singly or added to an integrated manifold base.

Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM) Technical Specifications

ModelAirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM)
Series4V200 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/8
Exhaust portPT1/8
Effective area (Cv)13.6 mm² (Cv 0.8)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight360 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area13.6 mm²
Flow coefficientCv 0.8
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-06Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM) Is Used

precision_manufacturing

Mid-stroke positioning on assembly fixtures

Closed-center 5/3 control stops a double-acting clamp or grip cylinder wherever the solenoids release it, ideal for assembly heads that pause under a part rather than cycling end to end.

view_module

Packaging and indexing pushers

With Cv 0.8 (catalog figure for the 4V230C-08) and a 0.05 s response, the valve gives packaging lines crisp three-position control of pushers and product stops at up to 3 cycles per second on O32-50 mm bores.

settings_input_component

Manifold-mounted multi-station control

The 4V200 body bolts into an integrated manifold base, so several 5/3 valves can run pick-and-place, ejector and hold stations from one air and wiring layout in a compact DC24V panel.

Is the AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM) the Right Valve?

Pick this 5/3 closed-center version when your actuator must stop at an intermediate point and stay put while de-energised. If you only need end-to-end stroke switching, the 5/2 versions of the 4V200 flow more (Cv 1.0) and cycle faster (5 c/s); if your bore or speed demand sits above the 4V200 class, step up to the 4V300 (Cv 1.65), and drop to the 4V100 (Cv 0.6) for small cylinders. Order a single valve with its own base or build a manifold group to feed several stations from one supply.

Replacing an existing unit? Match five points exactly: body size 4V200, function code 30C, port and thread (1/8in PT here), coil voltage (DC24V), and electrical entry (terminal). Note that the -AM AMISCO coil keeps the DC24V order voltage, but because our published wattage applies to the standard coil only, confirm the AMISCO coil's exact electrical rating with us before ordering.

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM) FAQ

It is a 5/3-way valve for double-acting cylinders and actuators, well matched to bores of roughly O32-50 mm. Flow through the center-position flow path is rated at 13.6 mm2 effective area (Cv 0.8, catalog figure for the 4V230C-08), with a maximum switching frequency of 3 cycles per second.

-AM means the valve left the AirTAC factory fitted with an AMISCO (Italian) solenoid coil instead of the standard one. The body, 5/3 closed-center function, 1/8in PT ports and DC24V order voltage are unchanged, but the published 3.0 W rating applies to the standard coil only - ask us to confirm the exact AMISCO coil rating for your DC24V supply.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06B-AM)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V230C06B-AM and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.