
The AirTAC 4V210-06 Solenoid Valve, 4V200 Series (4V21006B-AM) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V21006B-AM is a 5/2-way single-solenoid directional valve built on the 4V200 body, configured with 1/8-inch PT ports, a DC24V coil wired to a terminal box, and an AMISCO (Italian) solenoid coil fitted at the factory in place of the standard coil. In the energised state it ports supply air to one side of a double-acting cylinder; when the signal is cut, the internal spring returns the spool and the air is directed to the opposite side, so the actuator always sits in a defined position when de-energised.
Flow sits in the 4V200 class at an effective area of 17.0 mm2 (Cv 1.0, catalog figure for the 4V210-08), with a cycling rate up to 5 cycles per second and a response of 0.05 s or faster. That makes this valve a good match for bore sizes around O32-50 mm. The unit weighs about 220 g, uses an aluminium-alloy body, carries IP65 protection and needs no lubrication. Note that the AMISCO coil option changes the electrical supplier only; confirm its exact DC rating with us before ordering if your panel needs a precise wattage figure.
| Model | AirTAC 4V210-06 Solenoid Valve, 4V200 Series (4V21006B-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Directs air to O32-50 mm double-acting cylinders on machines, jigs and fixtures, with the spring return providing a defined home position whenever the DC24V signal is removed.
Keeps clamps extended while the solenoid is energised, then automatically relaxes them when the signal drops - useful on fixtures where releasing on power failure is the desired fail state.
Cycles pushers, ejectors and small transfer cylinders at up to 5 cycles per second on compact packing, sorting and assembly lines, with the 0.05 s response keeping machine timing tight.
Choose this 1/8-inch ported 4V200 valve when your cylinder is in the O32-50 mm range and a Cv 1.0 (catalog figure for the 4V210-08) is sufficient. Drop to the smaller 4V100 body (Cv 0.6) for compact cylinders, or step up to the 4V300 (Cv 1.65) if you need faster cycle times or a larger bore. The single-solenoid spring-return version is right when the cylinder must return to a known position on power loss; pick a 4V220 double-solenoid for memory behaviour or a 4V230C/E/P if a 5/3 centre function is needed. Single valves mount inline; multiple valves can share an integrated manifold base.
For an exact replacement, match all five points: body size (4V200), function (single 5/2), port and thread (1/8 PT), coil voltage (DC24V), electrical entry (terminal box), plus the AMISCO coil suffix on this variant. Confirm the AMISCO coil rating with us if the standard coil spec was on your original.
Quick checklist
It is a 5/2-way valve for double-acting cylinders and air actuators, with an effective area of 17.0 mm2 (Cv 1.0, catalog figure for the 4V210-08). In practice it suits bores of roughly O32-50 mm and switches up to 5 cycles per second. Operating pressure is 0.15-0.8 MPa with air filtered by a 40 um element.
The valve is wired for a 24 V DC supply through a terminal-box entry, and the -AM suffix means an AMISCO (Italian) coil is fitted instead of the standard AirTAC coil. The body, ports and flow performance are unchanged. The exact AMISCO coil wattage is not published in our data, so confirm it with us when planning panel loads or replacing an older unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.