
The AirTAC 4V230E-06 Solenoid Valve, 4V200 Series (4V230E06A-AM) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230E06A-AM is a 5/3-way double-solenoid valve in the 4V200 body family, built with an exhaust (E) center. At center position it vents both cylinder ports to atmosphere, so a connected double-acting cylinder floats free and can be moved by hand or by load - a useful behavior for applications where an actuator must not stay pressurised when the valve is neutral. Built on a 1/8" PT-threaded port with a terminal-box electrical entry, this SKU is the 4V230E-06A base valve supplied with a factory-fitted AMISCO (Italian) solenoid coil for AC220V service.
With an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum frequency of 3 cycles per second, this exhaust-center 5/3 version sits just below the 5/2 valves in the 4V200 range, which reach 17.0 mm2 / Cv 1.0. It responds in 0.05 s or less and weighs 360 g, and it suits cylinders of roughly O32-50 mm bore. Note that because of the -AM option, the coil wattage/VA rating differs from the standard AirTAC coil, so confirm the exact AMISCO coil rating with us when ordering.
| Model | AirTAC 4V230E-06 Solenoid Valve, 4V200 Series (4V230E06A-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Runs double-acting pushers and diverters on packaging conveyors where the exhaust center lets the actuator vent and drift free whenever the machine pauses between cycles.
Mounted on a common base with neighboring valves, it drives O32-50 mm clamp and pick cylinders, releasing both ports at center so operators can reposition parts by hand.
Controls double-acting slides and grippers on jigs and fixtures, with the Cv 0.8 (catalog figure for the 4V230C-08) flow class covering mid-size bores at up to 3 cycles per second.
Step down to the 4V100 (Cv 0.6) if your cylinder is small and cycle speed is modest; step up to the 4V300 (Cv 1.65) for larger bores or faster cycling. Within 5/3 types, choose exhaust center (this valve) when the actuator should drift freely at neutral, closed center when the cylinder must hold position, or pressure center when both sides should stay fed. A single valve on its own base suits standalone stations; mount several on a manifold base to share one supply and simplify piping.
For a like-for-like replacement, match all five points: body size (4V200), function (30E exhaust center), port and thread (1/8" PT - a -G suffix gives BSPP parallel, -T gives NPT), coil voltage (AC220V here), and electrical entry (terminal box, not the grommet/I lead-out). Adding -AM selects the AMISCO coil option as on this unit.
Quick checklist
It is a 5/3-way valve for double-acting cylinders and actuators of roughly O32-50 mm bore. The 5/3 exhaust-center spool gives an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a maximum frequency of 3 cycles per second, and switching takes 0.05 s or less.
-AM means the valve leaves the factory with an AMISCO (Italian) solenoid coil fitted in place of the standard AirTAC coil. The ordered voltage remains AC220V via the terminal box and the valve body, ports and flow are unchanged, but our published 4.5 VA figure refers to the standard coil only - please confirm the exact AMISCO coil rating with us before ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.