This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X110B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X110B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X110B
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X110B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X110B
A double acting, double-rod compact cylinder built to the DIN-standard ACP pattern, the ACPD80X110B pushes and pulls with identical force: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in each direction, because both strokes work on the rod-side area of the 80 mm bore. The 20 mm rod exits BOTH covers, so the through-rod resists rotation and side load, gives a symmetric mount, and lets the rear rod carry a sensor flag. The B code gives a male rod thread and the 1/4" port matches this bore. Note this model is discontinued; the current-production drop-in is ACED80X110 in the same bore, stroke and force class.
The hard-anodized aluminium body is an ISO 21287-class short build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and press fixtures. In practice, plan on roughly 1414 N of usable force at 0.5 MPa (about 60% of rating), which lifts about 72 kg vertically with a 2:1 margin. A fixed TPU bumper sits at both ends, speed spans 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof. This unit has no magnet; order the optional -S code if you need CMSE / DMSE switch sensing.
Airtac ACPD Double Rod Compact Cylinder ACPD80X110B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X110B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X110B |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X110B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X110B Is Used
Bearing press station
The equal 2356.2 N force in both directions suits a press-fit fixture on an automotive assembly line, where the through-rod keeps the press platen square under side load.
Reciprocating transfer beam
A rod on each cover lets a packaging machine drive a lift-and-lower beam from either end, moving trays at 30-500 mm/s with symmetric mounting.
Gantry position flag
In a robotic gantry, the rear rod carries a sensor flag while the front rod does the work; add the -S magnet code to read position with CMSE or DMSE switches.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X110B with the ACED80X110B
Choose the ACPD80X110B when a clamp or press station needs equal force on extend and retract - here 2356.2 N each way at 0.5 MPa. If the job needs less, the 63 mm bore delivers 1458.1 N; if it needs more, the 100 mm bore reaches 3681.6 N at the same pressure. The 110 mm stroke sits well inside the 300 mm maximum standard stroke for bore 80, so no made-to-order build is required. Remember the piston drifts when air is lost - add a rod lock or pilot check if the load must stay put. FA/FB flange and LB foot mountings bolt to the ISO 21287 face, and the -S magnet code enables CMSE / DMSE switches. For new projects, order the ACED80X110 instead and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED80X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X110B FAQ
Because it is a double-rod cylinder, force is identical in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal on extend and retract since both strokes use the rod-side area of the 80 mm bore. At 1.0 MPa the maximum reaches about 480.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, speed 30-500 mm/s, and a fixed TPU bumper at each end. As a rule of thumb, size the job for about 1414 N of real work at 0.5 MPa.
No - the ACPD family is discontinued. The current-production replacement is ACED80X110, an ISO 21287 compact cylinder in the same 80 mm bore, 110 mm stroke and force class. Before swapping, confirm the ISO 21287 mounting dimensions, since the ACP follows the older DIN-standard pattern. The ACED keeps the short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange or LB foot brackets bolt to the same face family.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X110B replacement — usually within 7-8 hours.