This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X110SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X110SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB
A double acting compact cylinder with a rod leaving both covers, the ACPD80X110SB pushes and pulls with identical output: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction, because both strokes work on the rod-side area. The through-rod resists rotation and side load, gives a symmetric mount, and lets the rear rod carry a sensor flag. This 80 mm bore model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be fitted directly.
The hard-anodized aluminium body is an ISO 21287 short build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight gantries and guarding. Fixed TPU bumpers sit at both ends and stroke speed runs 30-500 mm/s. In practice, plan on roughly 1414 N (about 60% of the rating) for real work at 0.5 MPa, which is a vertical lift of about 120 kg with a 2:1 margin. Note that this model is discontinued: the current-production drop-in is the ACED80X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X110SB |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB Is Used
Reciprocating conveyor pushers
The through-rod gives equal 2356.2 N thrust on the push and return stroke, so a packaging-line pusher indexes cartons at the same speed both ways at 0.5 MPa.
Lift-and-hold press fixtures
With about 120 kg of vertical lift capability at a 2:1 margin, the 80 mm bore raises die-set carts in a machine shop; pair it with a rod lock because the piston drifts when air is lost.
Position-flagged gantry stations
The rear rod carries a switch flag, and the fitted -S magnet accepts CMSE or DMSE switches for end-of-stroke confirmation on automated assembly gantries.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB with the ACED80X110SB
At 2356.2 N both ways at 0.5 MPa, this 80 mm bore suits clamping and lifting in the 1400 N usable range; step down to a 63 mm bore (1458.1 N) for lighter work or up to 100 mm (3681.6 N) when you need more force at the same pressure. The 110 mm stroke sits well inside the 300 mm standard limit for this bore. The B code gives a male M12x1.75 rod thread and the port is 1/4" PT; FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets bolt to the same face. Because a plain double-rod cylinder drifts when air is lost, add a rod lock or pilot check for a held load. Order the ACED80X110 as the current replacement and verify the ISO 21287 footprint first.
Replacement checklist
- ✓ Current-production ACE → ACED80X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X110SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" PT port matches the 80 mm bore.
Order the ACED80X110, the current-production ISO 21287 successor made by swapping the P for an E. It matches the same 80 mm bore, 110 mm stroke and force class, and accepts the same FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC mounting family. Since the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. This model already carries the optional -S magnet for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X110SB replacement — usually within 7-8 hours.