This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X375S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X375S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X375S
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X375S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 375mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X375S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke375 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X375S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X375S
Double acting with a rod leaving both covers, the ACPD80X375S is a discontinued DIN-standard compact cylinder in the 80 mm bore class. Because each stroke works on the rod-side area, it delivers 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction - never a larger push than pull. The 375 mm stroke is a made-to-order length, since the standard catalogue tops out at 300 mm for this bore. The through-rod resists rotation and side load, gives a symmetric mount, and the rear rod can carry a sensor flag, with a fixed TPU bumper at each end.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on long-stroke gantries and sliding guards where space is tight. At 0.5 MPa the 2356.2 N rating works out to roughly 240 kgf, so plan on lifting about 120 kg vertically with a 2:1 margin. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be fitted for end-of-stroke signalling. Production has ended: the current drop-in is the ACED80X375, and buyers should confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD80X375S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X375S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X375S |
| Bore size | Ø80 mm |
| Stroke | 375 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X375S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X375S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X375S Is Used
Sliding guard interlock
The 375 mm stroke opens a full-width machine guard on a packaging line, with the 2356.2 N rod-side force closing it firmly from either cover.
Push-pull transfer carriage
A rod on each end lets one cylinder index a conveyor cross-shuttle both ways with equal 2356.2 N force, no second cylinder needed.
Gantry lift with position feedback
With the -S magnet and DMSE switches, the vertical lift stage reports both end positions while handling parts up to about 120 kg with margin.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X375S with the ACED80X375S
Size both ways: if 2356.2 N per side is more than the job needs, the 63 mm ACPD gives 1458.1 N at 0.5 MPa; if the load needs more, step up to the 100 mm bore at 3681.6 N. Remember this cylinder does not hold position when air is lost - the piston drifts - so specify a rod lock or pilot check for a held load. Foot (LB) and flange (FA/FB) mounts suit long-stroke installations, and the -S magnet on this unit pairs with CMSE / DMSE switches. For new projects, order the ACED80X375 instead, confirming the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACED80X375S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X375S FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 375 mm stroke is a made-to-order length above the 300 mm standard maximum for an 80 mm bore.
Order the ACED80X375, the current-production ISO 21287 successor made by swapping the P for an E. It matches the same 80 mm bore, 375 mm stroke and force class with a matching short body and mounting family, but because the ACP is DIN-standard you should confirm the ISO 21287 mounting dimensions before swapping. This unit's -S magnet and CMSE / DMSE switch compatibility carry over to the ACED range.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X375S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X375S replacement — usually within 7-8 hours.