Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S
The AirTAC Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S is a genuine double-acting standard air cylinder with a Ø160mm bore and 110mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ160 mm
- Stroke110 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 29 mm
About the Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S
The AirTAC SC160X110S is a double-acting single-rod pneumatic cylinder delivering substantial push force of 10053 N at 0.5 MPa, rising to 18095 N at 0.9 MPa operating pressure. With a 160 mm bore, 110 mm stroke, and a robust 40 mm piston rod, it handles heavy linear actuation tasks where consistent, high-force output is required.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for precise, non-contact position feedback. The adjustable air cushion at each end decelerates the piston smoothly, protecting the end caps during high-speed operation. Its body length A is 239 mm, giving a compact footprint for its force class.
Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S Technical Specifications
| Model | Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (approx.) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S Is Used
Heavy Pallet Lifting
Provides the high push force needed to elevate loaded pallets in material handling lifts and scissor-table actuators, with sensor feedback confirming safe raised/lowered positions.
Press-Fit Assembly
Delivers 18 kN of force at 0.9 MPa for pressing bearings, bushings, or pins into housings. The built-in magnet enables end-of-stroke sensing to control press depth accurately.
Industrial Clamping
Powers heavy-duty welding and machining fixtures, maintaining clamp force on large workpieces. The adjustable cushion reduces impact shock, preserving fixture alignment over time.
Is the Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S the Right Cylinder?
Choose the SC160 when your application demands force in the 10 kN range at standard plant pressure. If your load is lighter, stepping down to the SC125 bore reduces push force to 6136 N at 0.5 MPa, saving space and air consumption. For even higher force, the SC200 bore provides 15708 N at the same pressure.
For this 110 mm stroke, the rigid 40 mm rod and tie-rod construction resist moderate side loads, but sustained off-axis force still requires an external guide or guided cylinder. When replacing an existing unit, match five points exactly: 160 mm bore, 110 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S FAQ
At 0.5 MPa, push force is 10053 N and pull force is 9425 N. At the maximum operating pressure of 0.9 MPa, push force reaches 18095 N. The theoretical maximum force at 1.0 MPa is 2050 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the cylinder's tie-rod barrel for non-contact position detection without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac AIRTAC SC125-160 Standard Cylinder SC160X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.