Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC
The AirTAC Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC is a genuine double-acting standard air cylinder with a Ø160mm bore and 180mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ160 mm
- Stroke180 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 29 mm
About the Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC
The SC160X180TC is a double-acting tie-rod cylinder delivering 10053 N of push force at 0.5 MPa, scaling to 18095 N at the maximum operating pressure of 0.9 MPa. With a 40 mm diameter piston rod and a 29 mm adjustable air cushion, this model is built for heavy linear actuation where controlled deceleration is essential.
This specific configuration includes a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC160TC), allowing the cylinder to pivot during operation. The 180 mm stroke is well within the 1500 mm maximum standard stroke for the 160 mm bore, making it a readily available genuine AirTAC unit.
Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC Technical Specifications
| Model | Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø160 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (approx.) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC Is Used
Heavy Press & Clamping
Generates up to 18095 N of clamping force at 0.9 MPa, suitable for large-scale pneumatic presses, forming tools, and industrial welding fixtures.
Material Handling Gates
The centre trunnion mount allows the cylinder to swing, making it ideal for actuating heavy diverter gates or chutes on aggregate and mining conveyors.
Construction Machinery
Provides robust, high-force linear motion for compacting, lifting, or positioning heavy structural components in rugged environments.
Is the Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC the Right Cylinder?
For applications requiring slightly less force, consider stepping down to the 125 mm bore (6136 N push at 0.5 MPa). If your load demands more, the 200 mm bore provides 15708 N at the same pressure. When replacing an existing cylinder, ensure a 5-point match: 160 mm bore, 180 mm stroke, PT3/4 port thread, centre trunnion (TC) mounting, and no magnet. The TC mount is ideal for pivoting loads, but ensure the trunnion pins are aligned to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC FAQ
At the standard operating pressure of 0.5 MPa, the push force is 10053 N and the pull force is 9425 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 18095 N. The theoretical maximum force at 1.0 MPa is 2050 kgf.
No. The SC series is a double-acting cylinder and does not hold position when air pressure is exhausted or the directional valve is centered. The piston will drift or drop under load. For load holding, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac AIRTAC SC125-160 Standard Cylinder SC160X180TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.