This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE63X10 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE63X10 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP63X10 is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE63X10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- StatusDiscontinued → ATE63X10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP63X10
A single acting, spring-extend pull cylinder in the discontinued ATP compact range, the ATP63X10 uses a 63 mm bore to deliver 1320 N of pull at 0.5 MPa and 1903.2 N at 0.7 MPa, both figures already net of the return spring. Air retracts the rod; the spring pushes it back out, so the unit fails to its extended home position on air loss and needs at least 0.2 MPa (28-145 psi operating band) to overcome the spring. The 10 mm stroke suits short retraction moves like clamping checks and part-release actions.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the short ISO 21287-class body roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. With 1320 N at 0.5 MPa, plan on roughly 790 N of real work force, which translates to lifting about 67 kg vertically at a 2:1 margin. Fixed TPU bumpers sit at both ends, the rod thread is female M10x1.5, and the port is 1/8". This model is discontinued; the current-production drop-in is the ATE63X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10 Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP63X10 |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE63X10 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE63X10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP63X10
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP63X10 Is Used
Clamp release on welding fixtures
Spring holds the clamp open; a 0.5 MPa air signal pulls 1320 N to release a welded bracket in 10 mm, and any air drop returns the clamp to its safe open state.
Carton gate retraction on filling lines
The spring-extended rod keeps the divert gate clear; air pulls it back across the conveyor lane for reject routing, with the fixed TPU bumper stopping the gate at each end.
Part kick-off at a CNC fixture
A finished machined bushing is flicked off the locating pin by the 10 mm pull stroke; the female M10x1.5 rod thread takes a custom kicker blade.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP63X10 with the ATE63X10
Size against the 0.5 MPa net pull: 1320 N here, 775 N at bore 50, and 2159.1 N at bore 80. If your retraction load sits near 790 N after applying a sensible margin, bore 63 is the right pick; step down to 50 for lighter gates, up to 80 for heavier tooling. The 10 mm stroke is well inside the standard range for this bore. Mounting is chosen at order time (FA/FB flange, LB foot, CA/CB clevis), and because no S code is present there is no magnet, so no CMSE or DMSE switch can be fitted - order the -S variant if sensing is needed. For new builds, specify the ATE63X10 instead, as this ATP model is discontinued.
Replacement checklist
- ✓ Current-production ACE → ATE63X10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP63X10 FAQ
At 0.5 MPa the net pull is 1320 N; at 0.7 MPa it reaches 1903.2 N. Both values are already net of the return spring, so no further deduction is needed. The spring extends the rod and air retracts it, with 0.2 MPa as the minimum working pressure to beat the spring, within a 0.2-1.0 MPa (28-145 psi) band and 1.5 MPa (215 psi) proof pressure. Speed range is 50-500 mm/s.
Order the ATE63X10, the current-production ISO 21287 successor: swap the P for an E and you get the same 63 mm bore, 10 mm stroke and force class in a matching short body. Because the ATP is DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. FA/FB flange, LB foot and CA/CB clevis options carry over, and the optional -S magnet code enables CMSE / DMSE switches on the replacement.
Request a Quote for the ATE63X10
Send us the quantity and destination. We confirm price, stock and lead time on the ATE63X10 replacement — usually within 7-8 hours.