This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE63X10B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE63X10B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10B
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP63X10B is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE63X10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- StatusDiscontinued → ATE63X10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP63X10B
A single acting pull cylinder with spring return, the ATP63X10B uses a 63 mm bore to deliver 1320 N of retracting force at 0.5 MPa (1903.2 N at 0.7 MPa), both figures already net of the return spring. The spring holds the rod extended at rest, so the unit fails to the extended position when air is lost; a minimum of 0.2 MPa is needed to overcome the spring and retract it. This model is discontinued, and the current-production drop-in is the ATE63X10.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight clamping nests and guarded stations. With the 1320 N pull at 0.5 MPa, plan on roughly 792 N of usable work force, and expect it to lift about 67 kg vertically with a 2:1 margin. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a male thread (the B code), and the port is 1/8". This unit has no magnet fitted; order the optional -S code if you need CMSE or DMSE switch sensing.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10B Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP63X10B |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE63X10B |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE63X10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP63X10B
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP63X10B Is Used
Clamp release on machining fixtures
Retracts a clamp link on a CNC fixture with 1320 N of pull at 0.5 MPa, while the spring keeps the clamp open during every tool change and air-off event.
Gate retraction on bottling lines
Pulls a short reject gate or guide out of the bottle path in 10 mm, returning to its extended home position by spring whenever conveyor air drops.
Carton hold-down on case sealers
The spring extends the pad down onto a carton flap at the sealer infeed; air retracts it 10 mm so the case can pass, lifting about 67 kg equivalent vertically with margin.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP63X10B with the ATE63X10B
At 1320 N pull at 0.5 MPa this bore sits between the 50 mm (775 N) and 80 mm (2159.1 N) frames, so step down to ATP50 for lighter retraction loads or up to ATP80 when you need roughly 60% more force. The 10 mm stroke suits short retraction moves like releasing a clamp or clearing a sensor window; remember the spring does not hold a mid-stroke position on air loss. Mount with FA/FB flange, LB foot or CA/CB clevis, and add the -S code only if CMSE or DMSE switches are needed. For new projects, specify the ATE63X10 instead and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ATE63X10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP63X10B FAQ
It is a single acting pull cylinder: the spring extends the rod and air retracts it. Pull force is 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa, both already net of the return spring. Operating pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 50-500 mm/s, and at least 0.2 MPa is required to beat the spring. On air loss the rod returns to its extended home position; it does not hold a mid-stroke point.
The short-body build saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits narrow jigs and guarded stations. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the standard face. This version has no magnet; the optional -S code adds one so CMSE or DMSE switches can be fitted. The model is discontinued - order the ATE63X10 and confirm the ISO 21287 mounting dimensions before the swap.
Request a Quote for the ATE63X10B
Send us the quantity and destination. We confirm price, stock and lead time on the ATE63X10B replacement — usually within 7-8 hours.