This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE63X10SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE63X10SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE63X10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- StatusDiscontinued → ATE63X10SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB
The ATP63X10SB is a single acting compact pull cylinder: a return spring extends the 16 mm rod and compressed air retracts it, so at rest and on air loss the rod sits at its extended home position. This 63 mm bore version delivers 1320 N of pull at 0.5 MPa and 1903.2 N at 0.7 MPa, both already net of the spring, with a short 10 mm stroke and a 1/8" port. It runs on air filtered to 40 um at 0.2-1.0 MPa (28-145 psi), proof tested to 1.5 MPa (215 psi), from -20 to +70 C at 50-500 mm/s. Note that this ATP family is discontinued; the current-production replacement is the ATE63X10 in the same bore, stroke and force class.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the mounting length roughly 50% shorter than an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and gantry heads. A fixed TPU bumper at both ends decelerates the rod at each limit. Because the spring, not the air, sets the rest position, this cylinder will not hold a mid-stroke point. For sizing, plan on about 792 N (roughly 80 kg of force) of usable work at 0.5 MPa, or about 67 kg of vertical lift with a 2:1 margin. The S code on this model means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body.
Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE63X10SB |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE63X10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB Is Used
Fixture latch release
Spring keeps a CNC jig latch engaged; a 1320 N pull at 0.5 MPa retracts the 10 mm stroke to unlock the part for unloading.
Pallet gate retraction
On a packaging line conveyor, the spring-extended rod holds a stop gate up; air pulls it down 10 mm to let cartons pass.
Fail-safe sensor flag
The fitted -S magnet drives a DMSE switch, so a test rig confirms the spring-extended home position after every air-loss event.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB with the ATE63X10SB
Size the bore to the pull load: at 0.5 MPa the 63 mm bore gives 1320 N net of the spring, while the 50 mm bore gives 775 N and the 80 mm bore 2159.1 N. If your clamped part weighs under about 67 kg and you want a 2:1 vertical-lift margin, this bore is the right pick; step up to 80 mm for heavier pulls. The 10 mm stroke suits short retraction moves like releasing a latch or clearing a sensor window. This unit carries the optional -S magnet, so CMSE / DMSE switches can confirm the retracted position. Mounting brackets bolt to the compact face, and since the ATP is discontinued, order the ATE63X10 and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ATE63X10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP63X10SB FAQ
At 0.5 MPa the net pull is 1320 N; at 0.7 MPa it rises to 1903.2 N. Both figures are already net of the return spring, so no subtraction is needed. Air retracts the rod and the spring extends it, so at least 0.2 MPa is required to overcome the spring. Operating range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 50-500 mm/s, and the 1/8" port feeds the 63 mm bore.
The ATP family is no longer in production. The current drop-in is the ATE63X10, which keeps the same 63 mm bore, 10 mm stroke and force class in the ISO 21287 short-body format; confirm the mounting dimensions against your fixture before swapping, since the ATP was DIN-standard. On this ATP63X10SB the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped to the body for end-of-stroke signalling.
Related AirTAC ACE Cylinders
Request a Quote for the ATE63X10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ATE63X10SB replacement — usually within 7-8 hours.