This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X10 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X10 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X10
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X10 is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X10
A single acting compact pull cylinder, the ATP80X10 uses an internal spring to extend the rod and compressed air to retract it, so the 80 mm bore delivers 2159.1 N of pull at 0.5 MPa (3101.6 N at 0.7 MPa), already net of the spring. Air supply must reach 0.2 MPa before the spring is overcome, and the unit runs on air filtered to 40 um at 0.2-1.0 MPa (28-145 psi) with a 1.5 MPa (215 psi) proof rating. The rod returns to its extended home position whenever air is lost, which makes the 10 mm stroke useful for fail-safe clamping rather than mid-stroke holding.
The hard-anodized aluminium body keeps the mounting length roughly 50% shorter than an ISO 15552 profile cylinder, so this 80 mm bore fits tight welding fixtures and press heads where a full-length body will not. In practical terms the 2159.1 N pull at 0.5 MPa supports about 1295 N of real work once you plan at 60% of rating, which is roughly 110 kg of vertical lift with a 2:1 margin. A fixed TPU bumper sits at both ends, the S45C rod carries a female M12x1.75 thread, and the 1/4" port matches the bore. This model is discontinued: the current-production drop-in is ATE80X10, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ATP Single Acting Port Compact Cylinder ATP80X10 Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X10 |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X10 |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X10
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X10 Is Used
Weld fixture unclamping
The spring-extended rod holds clamps open by default, and 2159.1 N of air pull at 0.5 MPa retracts them only when the cell is in a safe cycle, so a power cut leaves the fixture open.
Press-head part ejection
A 10 mm stroke is enough to kick formed brackets off a stamping die face, and the 1295 N usable pull at 0.5 MPa handles oily steel parts without a second actuator.
Gate-crack on packaging lines
Short 10 mm pull motion cracks a product gate or divertor at up to 500 mm/s, and the compact body slots into the guard channel where a full-length profile cylinder cannot.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X10 with the ATE80X10
At 2159.1 N pull at 0.5 MPa this 80 mm bore sits near the top of the compact range; if your load is lighter, the 63 mm bore gives 1320 N and the 50 mm bore 775 N at the same pressure, while the 100 mm bore reaches 3395.3 N. The 10 mm stroke is short by design, so keep it for eject, clamp-release or gate-crack duties and run speed between 50 and 500 mm/s. Mount with FA/FB flange, LB foot or CA/CB clevis brackets that bolt to the standard face, and remember this unit has no magnet: order the -S code if you need CMSE or DMSE switches. Since ATP80X10 is discontinued, spec ATE80X10 as the current replacement and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ATE80X10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X10 FAQ
At 0.5 MPa the rod pulls 2159.1 N, rising to 3101.6 N at 0.7 MPa, both figures net of the return spring. Working pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, and at least 0.2 MPa is required before air can beat the spring. Speed range is 50-500 mm/s on air filtered to 40 um, and the bore 80 port is 1/4" with an M12x1.75 female rod thread.
Order ATE80X10, the current-production ISO 21287 compact cylinder that swaps the P for an E and matches the same 80 mm bore, 10 mm stroke and force class. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, since the ATP was built to a DIN-standard compact layout. If you also need position sensing on the replacement, check the -S magnet option and CMSE / DMSE switch availability on the ATE series.
Request a Quote for the ATE80X10
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X10 replacement — usually within 7-8 hours.