This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X10S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X10S
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X10S is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X10S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X10S
A single acting pull cylinder with spring return, the ATP80X10S keeps its 20 mm rod extended by spring and retracts it with compressed air, needing just 0.2 MPa to overcome the spring. The 80 mm bore delivers 2159.1 N of pull at 0.5 MPa and 3101.6 N at 0.7 MPa, both figures already net of the spring, so what you read is what reaches the load. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling. It is discontinued; the current-production replacement is the ATE80X10, which swaps the P for an E in the same bore, stroke and force class.
The short ISO 21287 body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this size slots into clamping fixtures and machine frames where a full-length body cannot. Because the spring only returns the rod to its extended home position, it will not hold a mid-stroke pose on air loss. A fixed TPU bumper sits at both ends of the hard-anodized aluminium body, and the S45C hard-chrome rod carries a female M12x1.75 thread with a 1/4" PT port. As a planning figure, treat about 1295 N (roughly 132 kg) as the realistic working pull at 0.5 MPa rather than the full rating.
Airtac ATP Single Acting Port Compact Cylinder ATP80X10S Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X10S |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X10S |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X10S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X10S
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X10S Is Used
Spring-extended clamp on a CNC fixture
The spring holds the clamp closed on an aluminium billet while the machine cycles; 2159.1 N of pull at 0.5 MPa retracts the jaw for loading, and a power cut leaves the part safely clamped.
Bottle-gate return on a filling line
A 10 mm stroke swings a guide gate out of the bottle path; the spring snaps it back to the extended home position the instant air pressure drops, and the -S magnet feeds a DMSE switch to the PLC.
Die-protection interlock on a press
The normally-extended rod blocks die access; 0.2 MPa minimum air retracts it only while the guard is shut, and the ISO 21287 short body fits the narrow press bolster edge.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X10S with the ATE80X10S
At 0.5 MPa this bore pulls 2159.1 N net of the spring. If your clamp or linkage needs less, the 63 mm bore gives 1320 N; if you need more headroom, the 100 mm bore reaches 3395.3 N. The 10 mm stroke is within the standard range for this bore, so no made-to-order stroke is required. Match the mounting to your fixture - FA/FB flange, LB foot or CA/CB clevis - and remember the -S magnet on this model is what enables CMSE / DMSE switch mounting. Before ordering, note the ATP80X10S is discontinued and confirm the ISO 21287 mounting dimensions of the ATE80X10 replacement against your existing footprint.
Replacement checklist
- ✓ Current-production ACE → ATE80X10S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X10S FAQ
At 0.5 MPa the net pull is 2159.1 N and at 0.7 MPa it is 3101.6 N, both already net of the return spring. Air needs at least 0.2 MPa to beat the spring. For sizing, plan on roughly 1295 N (about 132 kg) of real work at 0.5 MPa, or halve the 220 kg vertical-lift equivalent for a 2:1 margin and lift about 110 kg. Operating range is 0.2-1.0 MPa (28-145 psi), proof pressure 1.5 MPa (215 psi), speed 50-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The ATP uses an ISO 21287 compact format: a hard-anodized aluminium body with covers that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and machine frames. Fixed TPU bumpers decelerate the rod at both ends. The ATP80X10S is discontinued; the current drop-in is the ATE80X10 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Request a Quote for the ATE80X10S
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X10S replacement — usually within 7-8 hours.