This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X15S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X15S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15S
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X15S is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X15S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X15S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X15S
A single acting pull cylinder with spring return, the ATP80X15S keeps its 20 mm rod extended by the spring and retracts it with air, delivering 2159.1 N of pull at 0.5 MPa (3101.6 N at 0.7 MPa), both figures already net of the spring. Air filtered to 40 um at 0.2-1.0 MPa (28-145 psi) drives it at 50-500 mm/s, and the S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight clamping stations and guarded assemblies. For sizing, plan on about 1295 N of real work at 0.5 MPa, and expect it to lift about 110 kg vertically with a 2:1 margin. Note that this model is discontinued: the current-production drop-in is the ATE80X15, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15S Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X15S |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X15S |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X15S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X15S
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X15S Is Used
Press-die clamp retraction
The 2159.1 N net pull at 0.5 MPa retracts a die-clamp hook on a stamping press fixture, and the spring pushes the hook back to its extended home the moment air is dumped.
Gate return on packaging lines
A 15 mm stroke is enough to snap a short-travel deflector gate on a carton conveyor back open when the line loses air, keeping product flowing to the reject chute.
Lab fixture lid lifting
With about 110 kg of vertical lift capability at a 2:1 margin, the spring-extend action raises the hinged lid of an automated test fixture without needing a pilot valve.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X15S with the ATE80X15S
At 80 mm bore this is the second-strongest pull in the range: 2159.1 N at 0.5 MPa versus 1320.0 N for the 63 mm bore and 3395.3 N for the 100 mm bore, both at the same pressure. The 15 mm stroke sits well inside the standard range for this bore, so no made-to-order stroke is needed. Choose the female M12x1.25 rod thread as coded here, or order the B variant for a male thread, and add FA/FB flange, LB foot or CA/CB clevis hardware to match the fixture. Since the spring returns the rod to its extended home on air loss, it will not hold a mid-stroke position. For new designs, specify the ATE80X15 instead, as this ATP version is discontinued.
Replacement checklist
- ✓ Current-production ACE → ATE80X15S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X15S FAQ
It pulls 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa, both net of the return spring. The spring extends the rod and air retracts it, so at least 0.2 MPa (28-145 psi operating range, 1.5 MPa / 215 psi proof) is needed to beat the spring. Speed range is 50-500 mm/s on air filtered to 40 um, from -20 to +70 C, with a 1/4" port and a female M12x1.25 rod thread.
The S means the optional -S magnet is fitted on this unit, so CMSE or DMSE reed or solid-state switches can be clipped to the body for end-of-stroke signals; models ordered without the S code carry no magnet. The ATP family is discontinued, and the current-production replacement is the ATE80X15, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. A fixed TPU bumper pads both ends of travel.
Request a Quote for the ATE80X15S
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X15S replacement — usually within 7-8 hours.