This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X15SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X15SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X15SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X15SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB
This is a single acting pull cylinder: an internal spring extends the rod to its home position and compressed air retracts it, so 0.2 MPa (28 psi) is the minimum working pressure needed to overcome the spring. The 80 mm bore delivers a net pull of 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa, already minus the spring, with a 20 mm rod, a 1/4" port and a male rod thread from the B code. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight die clamps and fixture plates. Note the ATP family is discontinued; the current-production drop-in is the ATE80X15, so confirm ISO 21287 mounting dimensions before swapping.
Practically, plan on roughly 1295 N of real work at 0.5 MPa rather than the full rating, which is about 66 kg of vertical lift with a 2:1 margin. The 15 mm stroke sits inside the 300 mm standard range for this bore, and the fixed TPU bumper at both ends simply decelerates the rod. Because this model carries the -S code, the magnet is fitted and CMSE or DMSE reed or solid-state switches can be mounted directly on the hard-anodized aluminium body.
Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X15SB |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X15SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB Is Used
Die clamp unclamping on a press fixture
The spring keeps the clamp extended onto a stamping die; a 0.5 MPa air signal pulls the 20 mm rod back 15 mm to release the die for changeover, and the 2159.1 N net pull handles stiff toggle links.
Part hold-down release on a CNC pallet
On a machining centre pallet the normally-extended rod holds a workpiece stop; air retraction frees the pallet for rotation, and the CMSE switch from the fitted -S magnet confirms the retracted state to the PLC.
Latch retraction on a carton sealing head
A packaging machine latch stays engaged by spring force; the cylinder pulls it clear for each carton pass at 50-500 mm/s, and the 1/4" port keeps recharge fast enough for high cycle rates.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB with the ATE80X15SB
Size against the neighbours: a 63 mm bore pulls 1320 N at 0.5 MPa and a 100 mm bore pulls 3395.3 N, so this 80 mm model at 2159.1 N sits squarely in the middle for heavy clamping or retraction duties. Remember the spring returns the rod to extended on air loss and will not hold a mid-stroke position, so design the fixture around the normally-extended state. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the standard face, and the fitted -S magnet accepts CMSE / DMSE switches. Order the ATE80X15 as the current replacement and verify its ISO 21287 footprint against your drawing.
Replacement checklist
- ✓ Current-production ACE → ATE80X15SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X15SB FAQ
At 0.5 MPa the net pull is 2159.1 N and at 0.7 MPa it is 3101.6 N, both already minus the return spring, so no derating math is needed on the published figures. Working pressure is 0.2-1.0 MPa (28-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed is 50-500 mm/s, and the bore 80 port is 1/4". For sizing, treat about 1295 N as the practical working pull at 0.5 MPa, roughly 66 kg of vertical lift with a 2:1 margin.
Yes, the ATP line is out of production; the current drop-in is the ATE80X15, which keeps the same 80 mm bore, 15 mm stroke and force class in the short ISO 21287 body. Because the ATP is DIN-standard, compare the ISO 21287 mounting dimensions against your drawing before swapping. This particular model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount on the body, and the ATE accepts the same switch family.
Related AirTAC ACE Cylinders
Request a Quote for the ATE80X15SB
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X15SB replacement — usually within 7-8 hours.