This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE80X25SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE80X25SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE80X25SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke25 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ATE80X25SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB
A single acting pull cylinder with spring return, the ATP80X25SB uses an 80 mm bore to deliver a net pull of 2159.1 N at 0.5 MPa (3101.6 N at 0.7 MPa, already subtracting the spring). The spring holds the rod extended at rest, and compressed air between 0.2 MPa and 1.0 MPa (28-145 psi) retracts it, so the unit fails safely to the extended home position on air loss. The S code fits the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling, and the B code gives a male rod thread instead of a female one.
Built as a short-body ISO 21287 class compact cylinder, it saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which matters inside tight welding fixtures or press guards. The hard-anodized aluminium body carries a fixed TPU bumper at each end, and the S45C hard-chrome 20 mm rod resists wear in high-cycle work. For planning, treat about 1295 N (roughly 132 kg of pull) as the realistic working force at 0.5 MPa, and expect it to lift about 110 kg vertically once a 2:1 margin is applied. Note that this model is discontinued: the current-production drop-in is the ATE80X25, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE80X25SB |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE80X25SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 2159.1 N |
| 0.7 MPa | 3101.6 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB Is Used
Weld fixture clamping
The spring keeps clamp arms extended over a weldment, and 2159.1 N of air pull at 0.5 MPa retracts them when the PLC opens the valve, all within a 25 mm stroke.
Press guard interlock
Fails to extended on air loss, so a sliding press guard stays closed; the 1/4" port feeds the 80 mm bore at up to 1.0 MPa (145 psi) for a fast 3101.6 N retract at 0.7 MPa.
Pallet-stacker latch
Spring-extended latch pins hold a battery cage locked on a warehouse forklift; the compact short body fits where a full-length ISO 15552 profile cylinder cannot.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB with the ATE80X25SB
Size by net pull, not bore alone: at 0.5 MPa this 80 mm bore pulls 2159.1 N after the spring, while a 63 mm bore manages 1320 N and a 100 mm bore reaches 3395.3 N, so step up only if the 80 mm figure falls short. Remember the spring cannot hold a mid-stroke position or lock a load; it simply returns the rod to extended when air is lost. Mounting brackets from the FA/FB flange, LB foot and CA/CB clevis family bolt to the standard face, and with the -S magnet fitted, CMSE or DMSE switches give position feedback. Order the ATE80X25 as the current replacement for this discontinued model.
Replacement checklist
- ✓ Current-production ACE → ATE80X25SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP80X25SB FAQ
It is a single acting pull cylinder: the spring extends the rod and air retracts it. Net of the return spring, it pulls 2159.1 N at 0.5 MPa and 3101.6 N at 0.7 MPa across the 25 mm stroke. Minimum working pressure is 0.2 MPa (28 psi) to overcome the spring, with a proof pressure of 1.5 MPa (215 psi), speed range 50-500 mm/s, and a 1/4" port on this 80 mm bore.
Order the ATE80X25, the current-production ISO 21287 successor: swap the P for an E and you get the same 80 mm bore, 25 mm stroke and force class in a matching short body. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ATP was built to a DIN-standard compact pattern, and re-check whether your switches need the -S magnet option.
Related AirTAC ACE Cylinders
Request a Quote for the ATE80X25SB
Send us the quantity and destination. We confirm price, stock and lead time on the ATE80X25SB replacement — usually within 7-8 hours.