Airtac B04-SAI Construction Machinery Special ISO Standard Cylinder B04-SAI63X160S
AirTAC B04-SAI63X160S Construction Machinery ISO Cylinder Specifications
- Model: B04-SAI63X160S
- Bore size: 63mm (ISO 6432 standard)
- Stroke: 160mm (adjustable cushioning)
- Operating pressure: 0.05-1.2 MPa
- Piston speed: 50-750 mm/s
- Port size: G1/4 (NPT1/4 optional)
- Rod thread: M16×1.5
- Seal material: NBR + PU combination
- Temperature range: -20℃ to 80℃ (dry air required below 0℃)
- Mounting type: ISO 15552 front flange (NF1), rear foot (MF1)
- Cushioning: Double adjustable rubber bumper
- Weight: 3.2kg ±2% (without accessories)
- Dimensions:
- Extended length: 348mm
- Retracted length: 188mm
- Body diameter: 80mm
- Rod end bracket: 98×42mm
- Protection rating: IP65 (rod seal), IP40 (entire cylinder)
- Lubrication: Pre-lubricated (DOP mist lubrication optional)
Heavy-duty ISO 15552 profile cylinder with reinforced construction for construction equipment. Features chromium-plated piston rod (HCP treatment) and anti-rotation guide for enhanced durability in high-vibration environments. Compatible with magnetic sensors (sensor slot included). Requires 5μm filtered compressed air with oil mist lubrication recommended for optimal performance.
- Excavator bucket control mechanisms
- Concrete pump truck hydraulic assist systems
- Crane outrigger positioning locks
- Pile driver impact dampening systems
- Earth-moving equipment articulation joints
Installation note:
Mount using grade 8.8 or higher fasteners with Loctite 243.
For vertical installations exceeding 45° angle, specify optional
rod-end spherical bearings (AS-63 accessory kit). Perform weekly
rod wiper inspection in high-dust environments.
| Property | Property Value |
|---|---|
| sku | B04-SAI63X160S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.