Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI100X600
AirTAC B06-SAI100X600 Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI100X600
- Bore size: Ø100mm
- Stroke: 600mm
- Operating pressure: 0.1-0.9 MPa
- Cushioning type: Adjustable air cushion (both ends)
- Rod thread: M20×1.5 (male)
- Material: Aluminum alloy cylinder tube, hard chrome-plated piston rod
- Seal type: HNBR seals (high nitrile for chemical resistance)
- Temperature range: -20℃ to 80℃ (continuous operation)
- Weight: 9.8kg ±3% (without accessories)
- Dimensions: 805mm(L) × 140mm(W) × 140mm(H) (fully retracted)
- ISO mounting: ISO15552 standard
- Corrosion resistance: Class CRC2 (salt spray test 48h)
- Lubrication: Pre-lubricated (maintenance-free for 5,000km stroke)
High-capacity pneumatic cylinder specifically engineered for battery manufacturing environments, featuring enhanced corrosion protection against electrolyte exposure. The extended 600mm stroke design enables long-reach operations in battery module handling. Integrated shock absorbers prevent vibration-induced damage to sensitive battery components.
- Lithium-ion battery cell stacking machines
- EV battery pack assembly lines
- Energy storage system module transfer
- Electrolyte filling station actuators
- Battery formation equipment pushers
Installation protocol:
Requires 0.3-1μm filtration (40μm minimum) with automatic drain.
For vertical mounting, use auxiliary rod-end support when stroke/rod ratio exceeds 10:1.
Apply conductive grease on mounting surfaces in ESD-sensitive environments.
| Property | Property Value |
|---|---|
| sku | B06-SAI100X600 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.