Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI100X75S
AirTAC B06-SAI100X75S Battery Production ISO Cylinder Specifications
- Model Series: B06-SAI (Battery Industry Special)
- Bore Size: Ø100mm (3.94") High-Torque Design
- Stroke: 75mm (2.95") ±1.5mm Tolerance
- Operating Pressure: 0.05-1.0MPa (7-145 PSI)
- Ambient Temperature: -20℃ to 80℃ (-4°F to 176°F)
- Cushioning: Adjustable Air Cushion (Dual Side)
- Port Thread: G3/8 (BSPP) with Anti-Vibration Flare
- Rod End: M16×1.5 Male Thread (Stainless Steel Collar)
- Seal Material: HS NBR (High-Speed Nitrile)
- Body Material: Anodized Aluminum Alloy 6063-T5
- Rod Material: Hard Chrome-Plated SUS304
- Weight: 3.8kg (8.38 lbs) ±2%
- Dimensions:
- Length: 220mm (8.66") - Retracted
- Width: 128mm (5.04") - Body Diameter
- Height: 128mm (5.04") - Mounting Base
- ISO Standard: 6432/VDMA 24562
- Protection Class: IP67 (Dust/Water Resistant)
- Lubrication: Pre-lubed (Grease Type: ISO VG32 Equivalent)
Heavy-duty pneumatic cylinder specifically engineered for battery manufacturing environments, featuring chemical-resistant seals and anti-sparking construction. The enhanced rod guidance system handles 20% higher side loads compared to standard ISO cylinders, with built-in magnetic sensor slots for position feedback.
- Lithium battery cell stacking machines
- Electrolyte filling station actuators
- Battery module compression systems
- EV battery pack assembly lines
- High-cycle electrode pressing operations
Installation Protocol:
Requires copper-free grease for assembly. Maintain 0.5mm minimum clearance between magnetic sensors and cylinder body.
Not compatible with phosphate ester fluids. Cycle rate should not exceed 500mm/s under full load.
| Property | Property Value |
|---|---|
| sku | B06-SAI100X75S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.