Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI40X175S
AirTAC B06-SAI40X175S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI40X175S
- Series: B06-SAI (Battery System Accessory Interface)
- Bore size: 40mm (ISO 6432 standard)
- Stroke: 175mm ±1mm tolerance
- Operating pressure: 0.05-1.0 MPa
- Cushioning: Adjustable elastic cushion + shock absorber
- Port size: G1/8 (ISO 1179-1 compliant)
- Rod thread: M12×1.25 (ISO 12240-2)
- Ambient temperature: -20℃ to +80℃
- Piston speed: 50-750 mm/s (lubricated)
- Seal material: Heat-resistant NBR (FDA compliant)
- Weight: 1.68 kg (excluding accessories)
- Dimensions (L×W×H):
- Basic length: 208mm (retracted)
- Full extended length: 383mm
- Mounting face: 40×40mm square
- Rod end: 25mm diameter
- Accessories: Built-in magnet for D-M9N series sensors
- Mounting: ISO 15552 foot-mount standard
Energy-efficient pneumatic cylinder specifically engineered for battery-powered automation systems. Features low-friction seals requiring 30% less breakaway pressure (0.03MPa) compared to standard models. The anodized aluminum body includes anti-corrosion treatment for humid environments. Integrated power-saving design maintains 0.15W standby consumption with position feedback.
- Lithium battery module assembly presses
- AGV (Automated Guided Vehicle) clamping systems
- Portable medical device actuators
- Solar-powered agricultural actuators
- EV battery swap station mechanisms
Installation protocol:
Requires 24V DC sensor power supply for position feedback.
Lubricate with ISO VG32 hydraulic oil during initial setup.
Maintain 0.5mm lateral clearance during alignment.
| Property | Property Value |
|---|---|
| sku | B06-SAI40X175S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.