Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI40X250
AirTAC B06-SAI40X250 Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI40X250
- Series: SAI Battery Special Series
- Standard: ISO 6432 (8mm rod diameter compliance)
- Bore size: 40mm (±0.1mm machining tolerance)
- Stroke: 250mm (customizable 25-500mm)
- Operating pressure: 0.05-1.0MPa (0.5-10bar)
- Cushioning: Adjustable elastic buffer + shock absorber pad
- Port size: M5x0.8 (dual auto-switch mounting grooves)
- Mounting: ISO 6432 standard foot & front flange
- Material: Hard anodized aluminum body, CR12MoV piston rod
- Seals: HNBR rubber (high nitrile for chemical resistance)
- Temperature range: -20℃ to 80℃ (dry air required below 0℃)
- Weight: 1.45kg (excluding sensors/mounts)
- Dimensions:
- Length: 338mm (base to rod end at full retraction)
- Width: 53mm (maximum flange width)
- Height: 57mm (centerline to mounting surface)
- Battery compatibility: 12/24VDC systems (low 0.9W power draw)
- IP rating: IP67 (wipers included for dust protection)
Engineered for battery-powered automation, the SAI40X250 features 35% reduced friction versus standard cylinders through dual-lip rod seals. Its copper-free design prevents oxidation in humid environments. The integrated T-slot allows magnetic switch installation without brackets. Special piston design achieves 98% volumetric efficiency at 0.3MPa.
- Mobile battery-powered assembly robots
- Solar panel cleaning systems
- Portable medical oxygen concentrators
- AGV material handling arms
- Outdoor LED display actuators
Operation tip:
For battery systems, pre-lubricate with ISO VG32 oil and use 0.05-0.15MPa
start-up pressure. Avoid continuous dwell exceeding 72 hours to prevent
seal compression set.
| Property | Property Value |
|---|---|
| sku | B06-SAI40X250 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.