Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI40X500S
AirTAC B06-SAI40X500S Battery-Powered ISO Cylinder Specifications
- Model: B06-SAI40X500S
- Series: Battery-optimized ISO 15552 compliant
- Bore size: 40mm (1-9/16")
- Stroke: 500mm (19.69") ±0.5mm tolerance
- Action type: Double-acting
- Operating pressure: 0.05–1.0 MPa (7-145 PSI)
- Cushioning: Adjustable rubber bumper + shock absorber
- Port size: M5x0.8 (G1/8 equivalent flow)
- Mounting: ISO mounting foot (NFSE) with 4x M6 threaded holes
- Rod thread: M10x1.25 male
- Material:
- Tube: Aluminum alloy AL6063-T5 with hard anodized finish
- Piston rod: SUS304 stainless steel with Ni-P plating
- End caps: Die-cast aluminum
- Seal material: Heat-resistant NBR (-20℃ to 100℃)
- Weight: 2.45kg (5.4lbs) ±3%
- Dimensions:
- Length: 612mm (24.09") [retracted]
- Width: 58mm (2.28") across mounting face
- Height: 82mm (3.23") including rod end
- IP rating: IP67 (wipers included)
- Ambient temperature: -20℃ to 80℃ (continuous operation)
- Lubrication: Pre-lubricated (maintenance-free for 5,000km stroke)
Engineered for battery-powered automation systems, this ISO cylinder features 35% reduced friction compared to standard models through precision honed tube and low-friction seals. The corrosion-resistant construction with dual-layer rod coating withstands harsh environments. Integrated magnetic field enables position sensing compatibility.
- Mobile battery-powered assembly robots
- EV battery module handling systems
- Solar tracker positioning mechanisms
- Portable medical equipment actuators
- AGV (Automated Guided Vehicle) lifting units
Installation note:
For optimal battery efficiency, maintain 0.3-0.6 MPa operating pressure. Use clean dry air with 5μm filtration.
Avoid lateral load exceeding 15N on piston rod. Cycle rate ≤500mm/s recommended.
| Property | Property Value |
|---|---|
| sku | B06-SAI40X500S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.