Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI40X800S
AirTAC B06-SAI40X800S Battery-Optimized ISO Cylinder Specifications
- Model: B06-SAI40X800S
- Type: Single-acting spring return (battery system optimized)
- Bore size: 40mm (ISO 6432 standard)
- Stroke: 800mm ±1.5mm
- Operating pressure: 0.05–0.9 MPa
- Cushioning: Adjustable elastic cushion + shock absorber
- Port size: G1/8 (ISO 1179-1 compliant)
- Piston speed: 50–800 mm/s (lubricated)
- Ambient temperature: -20℃ to 80℃
- Seal material: Heat-resistant NBR with anti-wear additives
- Body material: Anodized aluminum alloy (AL6063-T5)
- Rod material: Chrome-plated stainless steel (SUS304)
- Weight: 4.2kg (bare cylinder), 4.7kg (with mounting accessories)
- Dimensions: 980mm(L) × 60mm(W) × 60mm(H) (fully extended)
- ISO certification: ISO 6432:2015 Class C
- Rod end thread: M10×1.25 (male)
High-efficiency pneumatic cylinder specifically engineered for battery manufacturing systems, featuring ultra-low friction design (≤0.15 dynamic friction coefficient) and optimized air consumption. Incorporates anti-corrosion treatment for electrolyte exposure environments. Requires ISO VG32 hydraulic oil mist lubrication (0.5-1.0 cc/m³ air).
- Lithium battery cell stacking mechanisms
- EV battery module assembly lines
- Energy storage system compression fixtures
- Battery formation equipment actuators
- Automated battery welding positioning
Installation guidelines:
Requires horizontal mounting with ±3° tolerance. Maintain 15mm minimum
clearance around cylinder body for heat dissipation. Use flexible couplings
for strokes >500mm to prevent side load. Pre-charge air reservoir to 0.3MPa
before initial operation.
| Property | Property Value |
|---|---|
| sku | B06-SAI40X800S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.