Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI80X150
AirTAC B06-SAI80X150 Battery-optimized ISO Cylinder Specifications
- Full model: B06-SAI80X150
- Series: B06-SAI (Battery Application Special)
- Bore size: 80mm (3.15")
- Stroke: 150mm (5.91")
- Operating pressure: 0.1-0.9 MPa (14.5-130.5 PSI)
- Cushioning type: Adjustable pneumatic cushion
- Material: Aluminum alloy barrel, hard anodized piston rod (S45C steel)
- Rod thread: M20×1.5 external thread (standard)
- Mounting options: Basic type, front flange (MF1), rear flange (MF2), or foot-mounted (MP4)
- Weight: 4.5kg (9.92 lbs) ±3%
- Dimensions (L×W×H): 330mm × 96mm × 96mm (13.0" × 3.78" × 3.78")
- Temperature range: -20℃ to +80℃ (-4°F to +176°F)
- Lubrication: Pre-lubricated (non-replenishing design)
- Air filtration requirement: 40μm minimum
- ISO standard compliance: ISO 6432 (mounting dimensions), ISO 21287 (compact cylinders)
Specialized energy-saving cylinder with optimized seal design for battery-powered pneumatic systems. Features low breakaway pressure (0.08MPa) and reduced sliding resistance, achieving 30% lower air consumption vs standard cylinders. Integrated magnetic sensor groove (T-slot) for position feedback devices.
- Mobile battery-operated AGV transfer systems
- Solar-powered agricultural automation equipment
- Portable medical oxygen concentrators
- Off-grid material handling robots
- Hybrid hydraulic-pneumatic rescue tools
Installation protocol:
Requires dynamic load calculation when used in vertical orientation.
Maintain 0.5mm minimum clearance between rod end and load during alignment.
For battery systems, pair with low-power 3V-series valves (≤1.2W coil consumption).
| Property | Property Value |
|---|---|
| sku | B06-SAI80X150 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.