Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI80X300S
AirTAC B06-SAI80X300S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI80X300S
- Standard: ISO 15552 compliant
- Bore size: 80mm (3.15")
- Stroke: 300mm (11.81")
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable pneumatic cushion (dual-side)
- Port size: G3/8 (NPT1/4 optional)
- Rod thread: M20×1.5 male
- Ambient temperature: -20℃ to 80℃
- Piston speed: 50–800 mm/s
- Body material: Anodized aluminum alloy
- Rod material: Chrome-plated steel (HRC 40-50)
- Seal type: HNBR (Hydrogenated Nitrile) with wear indicator
- Weight: 4.8 kg (10.58 lbs)
- Dimensions: 630mm(L) × 80mm(Bore Ø) × 110mm(H with mounting brackets)
- Mounting options: ISO foot, front flange, rear pivot
- IP rating: IP67 (dust/water resistant)
Specialized energy-saving cylinder featuring low-friction design (≤0.05 dynamic friction coefficient) for battery-powered systems. Integrated position sensing grooves (M5×0.8) allow direct sensor mounting. Optimized air consumption reduces compressor load by 18% compared to standard models.
- Lithium battery cell stacking machines
- Solar panel automated assembly lines
- Electric vehicle battery pack handling
- Portable medical oxygen concentrators
- Off-grid energy storage systems
Installation protocol:
Requires dry air supply (dew point -20℃ below ambient). For vertical mounting,
use anti-drop lock nuts (ADLN-80 accessory recommended). Lubricate every
5,000km stroke or 6 months with ISO VG32 hydraulic oil.
Critical note:
Not compatible with phosphate ester fluids. Maximum side load capacity
280N at full extension. Always maintain ≥2mm rod-end clearance.
| Property | Property Value |
|---|---|
| sku | B06-SAI80X300S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.