Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI80X500S
AirTAC B06-SAI80X500S Battery-Optimized ISO Cylinder Specifications
- Model: B06-SAI80X500S
- Series: B06-SAI (Special Application Industrial)
- Bore size: 80mm (ISO 6432 standard)
- Stroke: 500mm (±1mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable pneumatic cushion (dual-side)
- Piston speed: 50–800 mm/s (lubricated condition)
- Port size: G3/8 (ISO 1179 connection)
- Ambient temperature: -10℃ to 70℃
- Seal material: Low-friction HNBR seals
- Rod material: Hard chrome-plated steel (5μm coating)
- Tube material: Anodized aluminum alloy
- Protection rating: IP67 (dust/water resistant)
- Weight: 5.8kg ±3% (excluding accessories)
- Dimensions:
- Total length: 705mm (500mm stroke + end caps)
- Mounting face width: 106mm
- Height with rod: 125mm
- Rod thread: M20×1.5 (external)
Energy-efficient ISO cylinder specifically engineered for battery-powered pneumatic systems. Features reduced breakaway pressure (0.05MPa start) and ultra-low friction design, achieving 30% lower air consumption than standard cylinders. Integrated wear-resistant guides ensure precise linear motion in high-cycle applications.
- Lithium battery cell stacking machines
- EV battery module assembly lines
- Portable medical device actuators
- Solar-powered warehouse automation
- Mobile robotics payload handling
Installation best practice:
Use only ISO 8573-1:2010 Class 3 compressed air (max 5mg/m³ oil content).
For vertical mounting, install rod-end down to prevent particulate accumulation.
Recommended maintenance: Relubricate every 500km of cumulative stroke distance.
| Property | Property Value |
|---|---|
| sku | B06-SAI80X500S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.