Airtac B06-SAU Battery Dedicated Standard Cylinder Series B06-SAU63X400
AirTAC B06-SAU63X400 Battery-Optimized Standard Cylinder Specifications
- Model: B06-SAU63X400
- Series: SAU (Compact Round Body)
- Bore size: 63mm
- Stroke: 400mm
- Operating pressure: 0.05–0.8 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Mounting type: SAU standard (front/rear flange)
- Rod end: External thread M20×1.5
- Temperature range: -20℃ to 80℃
- Seal material: NBR (Nitrile Butadiene Rubber)
- Port size: G1/8 (ISO228/1 standard)
- Body material: Anodized aluminum alloy
- Rod material: Stainless steel (SUS304)
- Weight: 5.2kg ±2%
- Dimensions (L×W×H): 640mm × 89mm × 89mm
- Protection rating: IP40 (standard wiper design)
- Lubrication: Pre-lubricated (DOP-free grease)
High-torque pneumatic cylinder engineered for battery manufacturing environments, featuring enhanced corrosion resistance and stable low-speed performance. The optimized sealing system minimizes internal leakage (<0.5mL/min under 0.5MPa) while maintaining smooth operation at speeds down to 30mm/s. Integrated shock absorbers reduce end-impact vibration by 40% compared to standard models.
- Lithium battery cell stacking mechanisms
- Battery module compression systems
- Electrode plate handling robots
- EV battery pack assembly lines
- Cleanroom-compatible production systems
- Battery formation equipment actuators
Installation protocol:
Requires ISO VG32 hydraulic oil lubrication if operated below -10℃.
Maintain 0.3-0.6mm clearance between piston rod and guide during alignment.
Use copper gaskets for pneumatic connections in high-vibration environments.
| Property | Property Value |
|---|---|
| sku | B06-SAU63X400 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.