Airtac SAU Standard Air Cylinder SAU63X200
The AirTAC SAU Standard Air Cylinder SAU63X200 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 200mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke200 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAU Standard Air Cylinder SAU63X200
The AirTAC SAU63X200 is a double-acting profile-type standard cylinder featuring a 63mm bore and 200mm stroke. Because it uses an extruded aluminum barrel rather than a standard rod-tie construction, its overall length is shorter than an ISO 15552 cylinder of the same bore, saving valuable machine space. It delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa, operating on a 3/8" port with an M16x1.5 rod thread.
Note that this specific SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG magnetic switches for position sensing. If your machine environment reaches up to 150 C, you can specify the Viton H high-temperature seal option instead of the standard TPU.
Airtac SAU Standard Air Cylinder SAU63X200 Technical Specifications
| Model | Airtac SAU Standard Air Cylinder SAU63X200 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAU Standard Air Cylinder SAU63X200
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAU Standard Air Cylinder SAU63X200 Is Used
CNC Pallet Clamping
Provides 1559 N of push force at 0.5 MPa to secure medium-sized machining pallets, while the compact profile fits neatly within tight workholding enclosures.
Is the Airtac SAU Standard Air Cylinder SAU63X200 the Right Cylinder?
When sizing this 63mm bore actuator, compare it to its neighbors: a 50mm bore gives 982 N push at 0.5 MPa, while stepping up to an 80mm bore yields 2513 N. This SAU63X200 strikes a middle ground for medium-force tasks. It shares its mounting footprint with AirTAC SC-series accessories, so you can use LB foot brackets, FA/FB flanges, or CA/CB clevises. Because this SKU has no -S magnet, it cannot support magnetic sensors.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable 21mm air cushions at both ends only decelerate the piston near stroke end and do not function as a locking brake. To hold a load securely in place during an air failure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAU Standard Air Cylinder SAU63X200 FAQ
The SAU63X200 has a 3/8" air port and an M16x1.5 rod thread. At 0.5 MPa it pushes with 1559 N and pulls with 1402 N. At 0.7 MPa the push force is 2182 N, and the theoretical maximum force is 318 kgf at 1.0 MPa.
It is not an ISO 15552 cylinder, but it shares mounting dimensions with the AirTAC SC series, accepting LB, FA, FB, CA, and CB brackets. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAU Standard Air Cylinder SAU63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.