Airtac B06-SAU Battery Dedicated Standard Cylinder Series B06-SAU63X50
AirTAC B06-SAU63X50 Battery-Powered Standard Cylinder Specifications
- Model: B06-SAU63X50
- Series: B06-SAU (Battery-Optimized Series)
- Bore size: 63mm
- Stroke: 50mm
- Operating pressure: 0.05–0.8 MPa
- Cushion type: Fixed buffer + impact absorber
- Material:
- Tube: Aluminum alloy (hard anodized)
- Piston rod: SUS304 stainless steel
- End caps: Die-cast aluminum
- Seals: NBR (Nitrile Butadiene Rubber)
- Weight: 2.3kg ±5% (including mounting accessories)
- Dimensions:
- Total length: 228mm (at full retraction)
- Stroke-adjusted length: 278mm (max extension)
- Outer diameter: 63mm ±0.5mm
- Mounting bracket spacing: 40mm (standard ISO 15552)
- Port size: G1/8 (dual ports for bidirectional control)
- Temperature range: -20℃ to 80℃ (dry air operation)
- Lubrication: Pre-lubricated (maintenance-free for 5,000km stroke)
- Protection rating: IP54 (standard), optional IP67 with custom seals
High-torque pneumatic actuator designed for battery-driven systems requiring consistent linear motion. Features precision honed inner tube surface (Ra≤0.4μm) and double-sealed piston design for low leakage (<0.5ml/min at 0.5MPa). Optimized for 12-24V DC power systems with reduced air consumption (30% less than standard cylinders).
- Lithium battery cell stacking machines
- Battery casing stamping/punching systems
- Automated guided vehicle (AGV) loading mechanisms
- Portable medical device actuators
- Solar-powered agricultural gate controls
Installation guidelines:
Maintain coaxial alignment within 0.2mm tolerance during mounting.
Use shock-absorbing brackets in high-frequency applications (>3Hz).
Lubricate with ISO VG32 hydraulic oil if operated below -10℃.
- Side load capacity: Max 150N at mid-stroke
- Allowable lateral misalignment: ≤0.5°
- Minimum lateral clearance: 15mm per side
| Property | Property Value |
|---|---|
| sku | B06-SAU63X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.