Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU40X25S
AirTAC B06-SU40X25S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SU40X25S
- Type: Single-acting spring return (battery-driven)
- Bore size: 40mm (ISO 6432 standard)
- Stroke: 25mm ±0.5mm
- Operating pressure: 0.05–0.8 MPa
- Piston speed: 50–800 mm/s (lubricated)
- Cushioning: Adjustable elastic buffer
- Port thread: M5×0.8 (dual ports)
- Rod end: Female thread M6×1.0
- Seal material: NBR with low-friction coating
- Temperature range: -20℃ to 80℃
- Weight: 0.65kg ±2%
- Dimensions: 140mm(L) × 48mm(W) × 48mm(H)
- Rod diameter: 12mm (chrome-plated)
- Protection rating: IP65 (rod extension side)
- Service life: 5,000km stroke distance (clean air)
Ultra-low friction cylinder engineered for battery-powered systems, featuring 30% reduced air consumption compared to standard models. The aluminum alloy body with hardened anodizing resists corrosion in humid environments. Integrated magnetic piston enables position sensing compatibility.
- Portable medical ventilator actuators
- AGV (Automated Guided Vehicle) clamping mechanisms
- Solar-powered agricultural gate controls
- Mobile laboratory automation equipment
- Battery-operated packaging machines
Installation guidelines:
Maintain ≤0.5mm/m alignment tolerance during mounting. For vertical installations,
use the built-in air vent plug on the upper cap. Lubricate with ISO VG32 turbine oil
every 50,000 cycles in continuous operation.
Critical note:
Requires 5μm filtered air with dew point -20℃ below ambient temperature.
Avoid side load forces exceeding 15N. Maximum lateral rod play: ±0.3mm.
| Property | Property Value |
|---|---|
| sku | B06-SU40X25S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.