Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU40X400S
AirTAC B06-SU40X400S Battery-Specific Standard Cylinder Specifications
- Model: B06-SU40X400S
- Series: B06-SU (Battery Operation Series)
- Bore size: 40mm
- Stroke: 400mm
- Operating pressure: 0.05–0.9 MPa
- Battery voltage: DC12-24V (Built-in lithium battery optional)
- Load capacity: ≤650N at 0.5MPa
- Speed range: 50–800mm/s (Cushion adjustable)
- Position detection: Built-in magnetic sensor slot (PNP/NPN configurable)
- Weight: 2.65kg (Excluding battery)
- Dimensions: 586mm(L) × 48mm(W) × 48mm(H) (Fully extended)
- Rod end thread: M10×1.25
- Seal material: Heat-resistant polyurethane (PU)
- Temperature range: -10℃ to 80℃
- Protection rating: IP54 (Dust & splash resistant)
- Cycle life: 5,000km or 10 million cycles (Whichever comes first)
Wireless pneumatic cylinder with integrated energy recovery system, optimized for battery-powered automation systems. Features low-friction piston design with 30% reduced power consumption compared to standard models. Includes smart sleep mode (<0.1W standby) and overload protection circuitry.
- Mobile robotic assembly stations
- Solar-powered material handling systems
- AGV (Automated Guided Vehicle) lifting mechanisms
- Portable medical equipment actuators
- Outdoor wireless monitoring device positioning
Installation note:
Requires monthly lithium grease replenishment via side-mounted nipples.
Avoid continuous vertical mounting angles exceeding ±15°.
Wireless control distance ≤15m (Open area).
Critical parameters:
- Minimum 2 bar pressure required for battery-saving mode activation
- Ambient humidity must remain below 90% RH (Non-condensing)
- Magnetic sensor alignment tolerance: ±0.5mm
| Property | Property Value |
|---|---|
| sku | B06-SU40X400S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.