This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAU50X200 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAU50X200 in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200
The AirTAC Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 is a double-acting profile-type standard cylinder with a Ø50mm bore and 200mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAU50X200, which matches its bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAU50X200
About the Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200
The AirTAC B06-SU50X200 is a discontinued double-acting profile-type cylinder. The B06- prefix marks it as the battery-manufacturing dedicated variant of the SU50X200, mechanically identical to the base model. It delivers 982 N push force at 0.5 MPa through a 50 mm bore and 200 mm stroke. AirTAC replaced this end-of-line unit with the SAU50X200, a true drop-in replacement retaining the exact bore, stroke, 1/4" port, output force, and SC-series mounting.
This compact extruded-aluminum body is shorter than an ISO 15552 cylinder of the same bore. A safe working load is roughly 589 N (about 60% of the 0.5 MPa push force), translating to a 50 kg vertical lift with a 2:1 margin. Because this SKU lacks a magnet (-S), it cannot accept a sensor. Note the SAU upgrade uses current CMSG/DMSG/EMSG switches and offers a SAUF built-in-valve variant the SU line never had.
Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 Technical Specifications
| Model | Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | B06-SAU50X200 |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The B06-SAU50X200 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The B06-SAU50X200 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 Is Used
Battery Cell Stacking
Ideal for prismatic cell stacking and alignment in module assembly, providing the precise 982 N push force and 200 mm travel needed to seat cells without crushing.
Pack Handling and Transfer
Drives indexing mechanisms to move battery packs along assembly lines, utilizing the compact profile body to fit tight automation frames.
Tab Welding Press
Applies consistent clamping pressure for busbar tab welding, using the 50 mm bore's stable force output over the 200 mm stroke.
Replacing the Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 with the B06-SAU50X200
To replace this discontinued B06-SU50X200, order the SAU50X200 drop-in equivalent. Verify your 1/4" port thread (PT, G, or NPT), M16x1.5 rod-end, and SC-series mounting (LB/FA/FB/CA/CB). Since this SKU has no magnet, it cannot take a sensor; if your battery line needs position detection, specify the SAU50X200S and upgrade to CMSG/DMSG/EMSG switches. Sizing both ways: a 40 mm bore gives 628 N push @0.5 MPa, while a 63 mm bore yields 1559 N. For loads needing 200 mm travel, the 50 mm bore is ideal. A plain cylinder drifts on air loss—the 21 mm cushions only decelerate near stroke ends, so add an external rod lock or pilot-operated check valve for holding. For 200 mm strokes, ensure guide alignment to prevent rod bending.
Replacement checklist
- ✓ Same bore / stroke → B06-SAU50X200
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU50X200 FAQ
Yes, the B06-SU50X200 is discontinued. The exact drop-in replacement is the AirTAC SAU50X200. It shares the same 50 mm bore, 200 mm stroke, 1/4" port, output force, and SC-series mounting. The B06- prefix simply denotes the battery-manufacturing dedicated variant, and the SAU replacement matches all physical specs.
The 50 mm bore delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a theoretical max of 200 kgf at 1.0 MPa. Because this specific SKU lacks a magnet, it cannot accept a sensor. If sensing is required, order the SAU50X200S and use current CMSG/DMSG/EMSG switches (the SU line used legacy CS1-B/DS1-B).
Related AirTAC SAU Cylinders
Request a Quote for the B06-SAU50X200
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAU50X200 replacement — usually within 7-8 hours.