Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW
The AirTAC Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1"
- Filtering grade5 µm
- DrainManual drain
- Inlet pressure0 - 0.9 MPa (0 - 131 psi)
- Bowl materialAluminium alloy
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW
The GF60025MJW is an AirTAC GF-series air filter for water and particulate removal only - no pressure regulation, no lubrication. It is the size 600 unit with a 1 in. PT thread, fitted with the finer 5 um element (the W suffix) for applications where standard 40 um filtration is not tight enough. Manual drain means the bowl is emptied by hand, and the maximum inlet pressure for this manual-drain filter is 0.9 MPa. The 600-size bowl is aluminium alloy, and the J suffix indicates no mounting bracket is supplied. Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GF family runs from size 200 to 600 with a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) elements, and PT, G (BSPP) or NPT threads. Flow data is published only as curves, so we confirm the exact flow and datasheet values for your duty on request.
Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW Technical Specifications
| Model | Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW |
|---|---|
| Series | GF600 air filter |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Drain type | Manual drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0 - 0.9 MPa (0 - 131 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | Aluminium alloy |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW
| GF600 | G-series air filter, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF600 · PT1" · 5 µm |
|---|---|
| One size down | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW Is Used
CNC machining-centre tool changers
The 5 um element protects the delicate solenoid valves and air bearings of an automatic tool-change carousel from fine particles that standard filtration lets through.
Automotive paint-shop air drops
Feeding spray-gun regulators at a paint booth, the finer 5 um grade reduces particle carryover that would otherwise show up as defects in the finish.
Laboratory pneumatic actuators
Bench-top test rigs and sample-handling cylinders rely on clean air; the GF60025MJW's 5 um element keeps fine debris out of small-bore pilot circuits.
Is the Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW the Right Filter?
Pick the W element when downstream equipment - sensors, spray nozzles, precision valves - needs finer protection than the standard 40 um grade; keep in mind a finer element loads faster and needs more frequent draining and element checks. Size 600 with 1 in. PT ports matches 1 in. main lines; a smaller GF300 or GF400 may suit lower flows. Manual drain requires hands-on attention; for remote or unattended points, specify automatic (A) or differential-pressure drain. Thread is PT as standard, with G and NPT as catalogue options. The J code omits the bracket. Flow appears as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 5 µm element when pressure loss rises.
The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW FAQ
AirTAC publishes filter flow as curves against pressure, not as a single rated figure, so we do not quote one number out of context. Share your operating pressure and demand and we will confirm the flow and datasheet figures for this model on request.
W selects the 5 um filtration element instead of the standard 40 um grade. Everything else about this filter - size 600 body, 1 in. PT ports, manual drain, aluminium bowl, no bracket - stays the same, giving you finer particulate protection on the same footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GF Copper-Free Pneumatic Air Treatment Component B52-GF60025MJW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.