Airtac GAC F.R.L. Unit GAC400N10ASNW
The AirTAC Airtac GAC F.R.L. Unit GAC400N10ASNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size3/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight2390 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC400N10ASNW
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC GAC400N10ASNW F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 5 um element to trap fine particles before they reach precision valves. Because the lubricator sits last in the sequence, oil mist enters the downstream line without fouling the regulator seat. The 2390 g assembly uses a nylon bowl and an automatic drain to clear condensate without an operator.
Operating at a standard pressure range of 0.15-0.9 MPa (20-130 psi), the unit handles a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). No gauge is supplied, but a 1/4in gauge connection allows a pressure indicator to be added later. The 100 cc condensate bowl and 185 cc oil reservoir dictate the maintenance rhythm, while the ambient temperature spans -5 to 70 C using ISO VG 32 lubricant.
Airtac GAC F.R.L. Unit GAC400N10ASNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC400N10ASNW |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC400N10ASNW
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC400N10ASNW Is Used
CNC Tool Changing
Feeds precision actuators on a machining center where the 5 um element protects sensitive tool-changer valves from fine particulate.
Form Fill Seal
Conditions air for a continuous motion pouch sealer, relying on the automatic drain to handle condensate during long production runs.
Lab Pneumatics
Supplies clean, regulated air to analytical instrument actuators, with the nylon bowl offering a visible check on condensate levels.
Is the Airtac GAC F.R.L. Unit GAC400N10ASNW the Right Air-Prep Unit?
Choose this 3/8in body for duties requiring finer filtration than the standard 40 um grade, as the W code specifies a 5 um element for instrument air or sensitive pneumatics. The nylon bowl saves weight compared to metal, and the A code specifies an automatic drain that empties the 100 cc bowl without manual intervention. Since the N after the port means no gauge is supplied, the set pressure cannot be read unless an indicator is fitted to the 1/4in connection. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the GAF400-10, GAR400-10 and GAL400-10 part numbers, ensuring a clogged element does not require replacing the whole assembly. Stepping up from the GAC300 increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, a 2x jump in sizing capacity.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 100 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 2390 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC400N10ASNW FAQ
The unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 100 cc drain bowl and a 185 cc oil bowl, weighs 2390 g, and functions in temperatures from -5 to 70 C using ISO VG 32 lubricant.
No, the N in the option string indicates no gauge is supplied. To monitor the outlet pressure, you must install a separate gauge into the 1/4in gauge connection on the regulator body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC400N10ASNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.