
The AirTAC GAFR Adjustable Filter Regulator GAFR30008ASJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008ASJNWT is a genuine AirTAC filter & regulator, combining both functions in a single body. It filters incoming air through a diversion structure that spins out liquid water and solid particles, then regulates the outlet to a steady pressure. This model has a 1/4in port, a 0.15-0.9 MPa (20-130 psi) standard pressure range, and a 5 um element for finer filtration. It has no gauge, so the set pressure cannot be read without adding one to the 1/8in gauge connection.
This unit weighs 500 g and has a 60 cc condensate bowl. Because it is one body rather than separate filter and regulator units, it reduces potential leak points and saves rail space. The balanced regulator mechanism holds the outlet steady as supply pressure varies, and the pressed-in self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008ASJNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
The 5 um element makes this suitable for feeding precision pneumatic valves or instruments that need cleaner air, while the regulator maintains a stable pressure for consistent operation.
With a 1/4in port and 500 g weight, this unit is sized for a single actuator or small machine station. The automatic drain keeps the 60 cc bowl from filling up during extended runs.
The filter and regulator in one body saves space on a compact machine frame. Without a bracket, it can be panel-mounted to fit tight layouts where a separate filter and regulator would not.
Choose this GAFR300 if you need a 1/4in port with a 500 g body and a 60 cc drain bowl. The automatic drain (A) handles condensate without manual intervention, ideal for wet or unattended lines. This model has no bracket (J), so plan for panel mounting or an existing bracket. The 5 um element (W) traps finer particles than the standard 40 um, but will need more frequent service. The NPT thread uses an MPa/psi gauge scale. If you need lubrication downstream, order the matching GAFC300-08 combination instead, as this unit does not add oil. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR30008ASJNWT is a filter & regulator with a 1/4in port, 0.15-0.9 MPa (20-130 psi) pressure range, 1.0 MPa (145 psi) max pressure, and 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 5 um element and an automatic drain.
The N after the port code means no gauge is supplied. The gauge connection on GAFR300 is 1/8in, so you can add a gauge later if needed. Without one, you cannot read the set pressure directly, so plan to install a gauge for applications where monitoring is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.