
The AirTAC GAFR Adjustable Filter Regulator GAFR30008LJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008LJTK is a filter and regulator combined into a single body, so incoming air is spun to separate liquid water and solid particles before a balanced regulator sets a steady outlet pressure. This lower-pressure version regulates from 0.15 to 0.4 MPa (20-58 psi) and comes with a 40 um element, a fitted circular gauge, and a semi-auto plus manual drain.
Weighing 500 g with a 1/4in port, this unit suits compact machine builds where a separate filter and regulator would waste rail space. The pressed-in self-locking knob resists set-pressure drift from vibration, and the 60 cc condensate bowl collects what the diversion structure removes from the air stream. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008LJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single work-holding fixture or a small indexing table where a stable 0.15-0.4 MPa supply keeps clamping force consistent. The 500 g body mounts neatly on a machine frame without stressing light tubing.
Use on a pneumatic test bench that needs a clean, regulated air supply for gauging or leak testing. The 40 um element protects sensitive test valves, and the semi-auto drain keeps the 60 cc bowl from overflowing during long sessions.
In a small assembly cell with limited rail space, this single-body unit replaces separate filter and regulator parts. The self-locking knob holds the set pressure even when nearby actuators vibrate the panel.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet; step up to the GAFR400 for a 3/8in or 1/2in port and a 7000 L/min envelope at the same inlet pressure. The PC bowl is the standard build, the 40 um element is fitted, and the semi-auto plus manual drain lets you empty the 60 cc bowl on a schedule or on demand. The J code means no mounting bracket is included, so plan for a panel mount or an existing bracket, and the K code adds the reverse-flow valve as an ordering difference. The L type tops out at 0.4 MPa, so if the machine may ever need more pressure, select the standard S type instead. For lines that need oil downstream, order the matching GAFC300-08 combination rather than this unit. The fitted gauge reads MPa/psi on the NPT thread scale. With a 1.0 MPa max supply, the 1.0 MPa maximum leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR30008LJTK is a filter & regulator with a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The 40 um element and the semi-auto plus manual drain are fitted, and the flow curve is plotted to 3500 L/min at 0.7 MPa inlet.
The K code indicates that a reverse-flow (reflux) valve is attached to the GAFR30008LJTK. It is an ordering difference that adds this valve to the unit; the catalogue does not detail its function in our data. The unit still filters and regulates in one body with no lubricator.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.