
The AirTAC GAFR Adjustable Filter Regulator GAFR30008LTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008LTK is a filter and regulator combined into one compact body, handling both filtration and pressure control without needing separate components. This unit uses a 1/4in port, offers a lower pressure range of 0.15-0.4 MPa (20-58 psi), and comes with a 40 um filter element to trap particulates.
A diversion structure inside spins the incoming air to separate liquid water and solid debris into the 60 cc condensate bowl, while the balanced regulator maintains a steady outlet pressure. The pressed-in, self-locking knob resists drift from vibration, and the included circular gauge with MPa/psi scale lets you monitor the set pressure directly. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008LTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single-acting clamp or a small positioning cylinder on an assembly fixture. The lower 0.4 MPa ceiling suits delicate operations that must not see higher pressures.
Provide filtered, regulated air to a benchtop pneumatic test rig or a laboratory instrument that needs a stable, low-pressure supply without risk of over-pressurization.
Supply a manual spray gun or a small blow-off station. The 40 um element protects the nozzle, and the included gauge lets the operator set and verify the low working pressure.
This GAFR300 body with a 1/4in port and 500 g weight is the middle size class, offering a 3500 L/min flow envelope at 0.7 MPa inlet. For a lighter duty line, the GAFR200 with its 25 cc bowl handles smaller flows, while stepping up to the GAFR400 with a 100 cc bowl and 7000 L/min envelope at 0.7 MPa inlet suits higher-demand systems. The PC bowl is the standard build choice; the semi-auto plus manual drain gives you both automatic condensate release and a manual override. The L-type regulator tops out at 0.4 MPa, so verify your system never needs more than that. The mounting bracket is included, and the 40 um element is the standard filtration grade. A reverse-flow (reflux) valve is fitted as an ordering option. If your line needs lubrication downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR30008LTK is a filter & regulator with a 1/4in port. Its pressure range is 0.15-0.4 MPa (20-58 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C and must not freeze. The condensate bowl holds 60 cc, and the unit weighs 500 g.
The 'L' indicates the lower-pressure regulator type, which has a working range of 0.15-0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa. This makes it suitable for applications that require a limited, precise low-pressure output. The 'K' at the end signifies that a reverse-flow (reflux) valve is fitted as an ordering option.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.