
The AirTAC GAFR Adjustable Filter Regulator GAFR30008LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008LWT is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate parts. It has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element that traps fine particles for sensitive equipment. This unit has no lubricator and only one bowl, the 60 cc condensate bowl, which collects the water and solids spun out by its diversion structure.
The pressed-in, self-locking knob resists drift from vibration, while the balanced mechanism holds the outlet steady as the supply pressure varies. Weighing 500 g, it is a compact unit for a small machine or a single actuator station. The semi-auto and manual drains are both fitted, giving you a choice between automatic purging and a manual check. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008LWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small indexing table with clean, regulated air at a stable low pressure, protecting the valve's internal pilot from supply fluctuations.
Use on a lab or test bench where a compact, lower-pressure supply is needed for a fixture or a calibration setup, with the 5 um element guarding sensitive instruments.
Mount on a small assembly station to power a single actuator or a hand tool, where the semi-auto drain lets an operator periodically purge the 60 cc bowl without stopping the line.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet; step up to the GAFR400 for a 100 cc bowl and a 7000 L/min envelope if you need more capacity. The PC bowl is the standard build, while C and N options offer metal or nylon bodies for different environments. This model has the semi-auto and manual drains, but an A code swaps to an automatic drain for unattended lines. The L type tops out at 0.4 MPa, so if your machine may ever need more, select the standard S type instead. The mounting bracket is included, and the 5 um element filters finer than the standard 40 um, though it will need service sooner. The fitted gauge reads in MPa/psi, matching the NPT threads. If your line needs oil downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The unit includes a 5 um element and a semi-auto plus manual drain.
The L indicates the lower-pressure type, which regulates from 0.15 to 0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa range. This suits applications needing a gentle, stable low pressure, but it cannot go higher, so verify your maximum required outlet pressure before choosing it.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.