
The AirTAC GAFR Adjustable Filter Regulator GAFR30008SJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008SJNTK is a filter and regulator combined into one body, replacing a separate filter plus regulator pair. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure via a balanced, self-locking regulator. This unit has a 1/4in port, works in the 0.15-0.9 MPa (20-130 psi) range, and uses a 40 um element.
This model ships with a 60 cc condensate bowl and weighs 500 g, placing it in the mid-size GAFR300 class. The pressed-in knob resists drift from vibration, keeping the set pressure stable. No lubricator is included or fitted - this is a filter and regulator only, with a single drain bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008SJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single pneumatic clamp or small fixture with stable 0.15-0.9 MPa pressure. The 40 um element protects the valve from particles, while the self-locking knob holds the setpoint during machine vibration.
Use on a test bench where a clean, regulated air supply is needed for prototype actuators or sensors. The 60 cc bowl provides a visible condensate level, and the manual drain allows quick purging between tests.
Mount on a mobile maintenance cart to supply filtered, regulated air to pneumatic tools. The compact 500 g body and 1/4in port fit tight spaces, while the reflux valve is pre-fitted for reverse-flow conditions.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a 60 cc drain bowl and flow plotted to 3500 L/min at 0.7 MPa inlet. This version has a PC bowl, a semi-auto plus manual drain, and no mounting bracket (J) for panel-mount installations. The 40 um element suits general shop air, while the 5 um option (W) is for finer filtration needs. No gauge is fitted (N), but the 1/8in gauge connection is ready for an add-on. The reverse-flow (reflux) valve (K) is included as an ordering difference. If downstream lubrication is required, order the matching GAFC300-08 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR30008SJNTK is a filter & regulator with a 1/4in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and 500 g weight. It uses a 40 um element and has a PC bowl.
The N code means no gauge is supplied, leaving a 1/8in connection for adding one later. The J code omits the mounting bracket, which suits installations using existing panel mounts or custom frames. Both options reduce cost when the standard accessories are not needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.