
The AirTAC GAFR Adjustable Filter Regulator GAFR30008SJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008SJNWTK is a genuine AirTAC filter & regulator that combines both functions in one body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port with a working range of 0.15-0.9 MPa (20-130 psi) and uses a 5 um element for finer particle removal.
This model comes with a PC bowl and both semi-auto and manual drains, but no mounting bracket or gauge. A reverse-flow (reflux) valve is fitted. The unit weighs 500 g and has a 60 cc condensate bowl, with its flow curve plotted to 3500 L/min at 0.7 MPa inlet for sizing reference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008SJNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly station, where the 5 um element protects fine internal passages from particle wear.
Supply clean, regulated air to a laboratory test fixture with a single 1/4in connection, using the manual drain for controlled maintenance.
Mount this 500 g unit on a panel without a bracket, saving space on a compact machine frame where the 60 cc bowl is adequate for light condensate loads.
Choose this GAFR300 for 1/4in lines where a compact 500 g unit with a 60 cc drain bowl fits the machine layout. The 5 um element suits precision valves or instrument air, though it will need more frequent service than a 40 um filter. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The semi-auto plus manual drain requires periodic attention, and the reflux valve (K) is an ordering difference only. If oil is needed downstream, order the matching GAFC300-08 combination instead. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near the maximum for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), with 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It uses a 5 um element and has a 1/8in gauge connection.
The J code omits the mounting bracket for panel-mount or existing bracket setups, and the N code means no gauge is supplied. You can add a gauge through the 1/8in connection. The bracket is not needed if you are mounting directly to a panel or frame.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.